Using here IC-746, this option and all the rest works just fine. Has only one bug: hitting any key within DXB switching from VFO-B to VFO-A
73! ILYA de 4Z1UF > -----Original Message----- > From: [email protected] [mailto:dxbase- > [email protected]] On Behalf Of John Forward > Sent: Wednesday, March 16, 2011 10:30 PM > To: DXBase Reflector > Subject: [Dxbase] Icom not QSY to spot frequency > > At one time, clicking on the QSY in DXbase for a spot, my Icom IC736 would > change to the listed frequency OK. The FT1000MP (rig 1) does it OK but with > DXbase 2007 the IC736 (rig 2) won't. It will save everything to the log OK except > the split frequency - no real problem. I have replaced the CI-V cable and tried > the radios.ini file from DXbase 2005 and reinstalled DXbase2007 but no go! I > installed Ham Radio Deluxe (PC rig control program) and that works fine. I can > change the IC736 frequency from the PC OK, so guess that the rig and CI-V cable > are both OK. It would therefore appear to be a DXbase problem. Any help or > suggestions would be most welcome - it's driving me nuts! > > > > John, G3HTA > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
