Can you please send 'ifconfig -a' and 'ethtool -e ethx' from all I350-F4 Sgl' ports.
-Tushar >-----Original Message----- >From: Nathan Angelacos [mailto:[email protected]] >Sent: Tuesday, September 25, 2012 11:10 AM >To: Abodunrin, Akeem G >Cc: [email protected] >Subject: Re: [E1000-devel] MAC addresses with igb and I350-F4 Sgl > >Akeem, > >Thank you for your help > >> Are you using any kind of bonding? > >No; also verified the bonding module is not loaded. > > >>Can you please send me lspci -vvv dump... >>Thanks, > > >We have two identical machines with the same symptoms. >I've attached the lspci output from the second machine (so the MAC >addresses are different from my first post) > > >FWIW and full disclosure- > >According to the yottamark, all 4 cards were manufactured late 2011. > >https://qdms.intel.com/dm/d.aspx/33ca8ee9-6f44-4707-9839- >d30f6644d4b3/pcn111341-00.pdf > >says there was an eeprom change, but seems to indicate that it does not >apply to the F4 cards > >ethtool -i eth2 says: > >driver: igb >version: 3.0.6-k2 >firmware-version: 1.5-2 >bus-info: 0000:05:00.1 > > >Thanks again ------------------------------------------------------------------------------ Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://ad.doubleclick.net/clk;258768047;13503038;j? http://info.appdynamics.com/FreeJavaPerformanceDownload.html _______________________________________________ E1000-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/e1000-devel To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired
