Hi, I've just upgraded to version 1.2.38 of the i40e driver, and still seeing the driver issues I mentioned in an earlier report:
May 14 12:05:30 88 kernel: i40e 0000:03:00.1: TX driver issue detected, PF reset issued May 14 12:05:30 88 kernel: i40e 0000:03:00.1: FCoE capability is disabled May 14 12:05:30 88 kernel: i40e 0000:03:00.1: PHC enabled May 14 12:05:31 88 kernel: i40e 0000:03:00.1: eth4: NIC Link is Up 10 Gbps Full Duplex, Flow Control: None May 14 12:05:31 88 kernel: i40e 0000:03:00.1: eth4: NIC Link is Down May 14 12:05:33 88 kernel: i40e 0000:03:00.1: eth4: NIC Link is Up 10 Gbps Full Duplex, Flow Control: None May 14 12:05:38 88 kernel: connection3:0: ping timeout of 5 secs expired, recv timeout 5, last rx 12248432565, last ping 12248437565, now 12248442565 May 14 12:05:38 88 kernel: connection3:0: detected conn error (1011) May 14 12:05:38 88 kernel: device-mapper: multipath: Failing path 8:64. May 14 12:05:38 88 multipathd: mpatho: sde - readsector0 checker reports path is down May 14 12:05:38 88 multipathd: checker failed path 8:64 in map mpatho May 14 12:05:38 88 multipathd: mpatho: remaining active paths: 2 May 14 12:05:38 88 iscsid: Kernel reported iSCSI connection 3:0 error (1011 - ISCSI_ERR_CONN_FAILED: iSCSI connection failed) state (3) May 14 12:05:40 88 kernel: connection1:0: ping timeout of 5 secs expired, recv timeout 5, last rx 12248434595, last ping 12248439595, now 12248444595 May 14 12:05:40 88 kernel: connection1:0: detected conn error (1011) May 14 12:05:40 88 iscsid: Kernel reported iSCSI connection 1:0 error (1011 - ISCSI_ERR_CONN_FAILED: iSCSI connection failed) state (3) May 14 12:05:40 88 iscsid: connection3:0 is operational after recovery (1 attempts) May 14 12:05:42 88 iscsid: connection1:0 is operational after recovery (1 attempts) May 14 12:05:46 88 multipathd: mpatho: sde - readsector0 checker reports path is up May 14 12:05:46 88 multipathd: 8:64: reinstated May 14 12:05:46 88 multipathd: mpatho: remaining active paths: 3 May 14 12:12:14 88 kernel: i40e 0000:03:00.1: FD filter space full, new ntuple rules will not be added May 14 12:12:15 88 kernel: i40e 0000:03:00.1: FD Filter table flushed and FD-SB replayed. May 14 12:12:15 88 kernel: i40e 0000:03:00.1: FD Sideband/ntuple is being enabled since we have space in the table now May 14 12:12:15 88 kernel: i40e 0000:03:00.1: ATR is being enabled since we have space in the table now Matyas ------------------------------------------------------------------------------ One dashboard for servers and applications across Physical-Virtual-Cloud Widest out-of-the-box monitoring support with 50+ applications Performance metrics, stats and reports that give you Actionable Insights Deep dive visibility with transaction tracing using APM Insight. http://ad.doubleclick.net/ddm/clk/290420510;117567292;y _______________________________________________ E1000-devel mailing list E1000-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/e1000-devel To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired
