You need to contact whoever sold you the parts. If the parts are already on a finished assembly that is not produced by Nokia, you need to contact the manufacturer of the finished assembly.
You can continue to ask questions here, especially if you think they're going to be simple, but it I'm just suggesting going through your official contacts as this would allow us to look into more details of your problems under NDA. Todd Fujinaka Software Application Engineer Networking Division (ND) Intel Corporation todd.fujin...@intel.com (503) 712-4565 -----Original Message----- From: Padmanabhan, Ranjith (Nokia - IN/Bangalore) [mailto:ranjith.padmanab...@nokia.com] Sent: Wednesday, June 24, 2015 9:54 PM To: Fujinaka, Todd; e1000-de...@lists.sf.net Subject: RE: SR IOV not coming in RHEL 7.1 Dear Todd Fujinaka, Thanks for the reply. I am afraid whether I know the procedure. Could you please guide me. Regards, Ranjith Padmanabhan -----Original Message----- From: ext Fujinaka, Todd [mailto:todd.fujin...@intel.com] Sent: Wednesday, June 24, 2015 8:42 PM To: Padmanabhan, Ranjith (Nokia - IN/Bangalore); e1000-de...@lists.sf.net Subject: RE: SR IOV not coming in RHEL 7.1 Can you ask this through your Intel FAE? There's a lot more questions to be asked and it would be easier to answer if we tracked it properly. Todd Fujinaka Software Application Engineer Networking Division (ND) Intel Corporation todd.fujin...@intel.com (503) 712-4565 -----Original Message----- From: Padmanabhan, Ranjith (Nokia - IN/Bangalore) [mailto:ranjith.padmanab...@nokia.com] Sent: Tuesday, June 23, 2015 9:49 PM To: e1000-de...@lists.sf.net Subject: [E1000-devel] SR IOV not coming in RHEL 7.1 Hi, In RHEL 7.1, trying to bring SR-IOV, however it is not coming even after configuring in /etc/modprob.d/igb.conf options igb max_vfs=1 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.10.0-229.el7.x86_64 root=UUID=bbfa540c-cca5-4b4e-a17e-1decdd6194c4 ro crashkernel=auto console=ttyS0,38400 net.ifnames=0 biosdevname=0 rhgb quiet intel_iommu=on BIOS setting done enable SR-IOV as well Intel Vd-enabled. Could you please share inputs. PS: if done manually(modprobe -r igb & modprobe igb max_vfs=1) interfaces are coming up. Regards, Ranjith Padmanabhan ------------------------------------------------------------------------------ Monitor 25 network devices or servers for free with OpManager! OpManager is web-based network management software that monitors network devices and physical & virtual servers, alerts via email & sms for fault. Monitor 25 devices for free with no restriction. Download now http://ad.doubleclick.net/ddm/clk/292181274;119417398;o _______________________________________________ E1000-devel mailing list E1000-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/e1000-devel To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired
