----- Original Message ----- From: "Santiago Garcia Mantinan" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Monday, April 04, 2005 8:41 PM Subject: [Eagleusb-dev] Problems with eagle-usb version 2.1.1
> Hi! > > On the 6th of February of this year I wrote to tell you about the problems I > was having with my eagle based modem, I'm sorry I have not provided more > feedback since then, but I know have more input to provide you on the > problems I see with the modem. > > I have changed my server to a UP system, opposed to my old SMP one, and I > have found some things when testing the modem with this new server. > > 1- The problem with the system freeze I used to have when using the driver > in 2.4 kernels continues to happen in this new system, but I have managed to > narrow the thing a bit, it only happens with ohci based cards, not uhci > ones. The problem happens after doing the eaglectrl -d to upload the > firmware, as soon as the firmware is uploaded, and only in 2.4 kernels. > > 2- The modem gets software disconnected on some conditions. I cannot > descrive the conditions, but I have managed to get this to happen using old > uhci devices (usb 1.1 via and intel based systems), when I send a lot of > mails to my system (postfix based). This happens in both 2.4 and 2.6, a > typical log of this is this one: > > ... > Mar 31 03:18:46 bri kernel: [Eagle-usb] transmit error with URB status -110 > Mar 31 03:18:46 bri last message repeated 4 times > Mar 31 03:18:46 bri kernel: hub.c: already running port 2 disabled by hub (EMI?), re-enabling... > Mar 31 03:18:46 bri kernel: usb.c: USB disconnect on device 00:07.2-2 address 4 > Mar 31 03:18:46 bri kernel: [eagle-usb] eu_irq : URB canceled by user. > Mar 31 03:18:46 bri kernel: [eagle-usb] ADSL device removed > Mar 31 03:18:46 bri kernel: hub.c: new USB device 00:07.2-2, assigned address 5 > Mar 31 03:18:47 bri kernel: [eagle-usb] New USB ADSL device detected, waiting for DSP code... > Mar 31 03:18:47 bri kernel: [eagle-usb] created proc entry at : /proc/driver/eagle-usb/001-005 > ... > > Well, I don't know what else to add, the modem is working quite stable when > used in a modern USB 2.0 card, like my ohci based one when using 2.6.11. > > I suppose you'll need more info to track this down, please don't hesitate to > ask for it. > > Regards... > -- > Manty/BestiaTester -> http://manty.net > This problem is know with some old usb hardware (Intel PIIX3 but other too) What is your usb 1.1 chipset, what show lspci?
