Hi,
Santiago Garcia Mantinan wrote:
Hi!
On the 6th of February of this year I wrote to tell you about the problems I
was having with my eagle based modem, I'm sorry I have not provided more
feedback since then, but I know have more input to provide you on the
problems I see with the modem.
I have changed my server to a UP system, opposed to my old SMP one, and I
have found some things when testing the modem with this new server.
1- The problem with the system freeze I used to have when using the driver
in 2.4 kernels continues to happen in this new system, but I have managed to
narrow the thing a bit, it only happens with ohci based cards, not uhci
ones. The problem happens after doing the eaglectrl -d to upload the
firmware, as soon as the firmware is uploaded, and only in 2.4 kernels.
Could you provide a log with debug level activated (eaglectrl -x ff)
2- The modem gets software disconnected on some conditions. I cannot
descrive the conditions, but I have managed to get this to happen using old
uhci devices (usb 1.1 via and intel based systems), when I send a lot of
mails to my system (postfix based). This happens in both 2.4 and 2.6, a
typical log of this is this one:
...
Mar 31 03:18:46 bri kernel: [Eagle-usb] transmit error with URB status -110
Mar 31 03:18:46 bri last message repeated 4 times
Mar 31 03:18:46 bri kernel: hub.c: already running port 2 disabled by hub
(EMI?), re-enabling...
Mar 31 03:18:46 bri kernel: usb.c: USB disconnect on device 00:07.2-2 address 4
Mar 31 03:18:46 bri kernel: [eagle-usb] eu_irq : URB canceled by user.
Mar 31 03:18:46 bri kernel: [eagle-usb] ADSL device removed
Mar 31 03:18:46 bri kernel: hub.c: new USB device 00:07.2-2, assigned address 5
Mar 31 03:18:47 bri kernel: [eagle-usb] New USB ADSL device detected, waiting
for DSP code...
Mar 31 03:18:47 bri kernel: [eagle-usb] created proc entry at :
/proc/driver/eagle-usb/001-005
...
That's strange : I don't remember if somebod had already this problem.
Is your hub provide enough power ?
If you set an upload limit, does it happen ?
Could you try ueagle-atm
(http://dev.eagle-usb.org/wakka.php?wiki=DevEagleUsbATM) ?
Matthieu
