Le sam 30/10/2004 à 01:41, Benoit Audouard a écrit : > Le samedi 30 octobre 2004 à 00:58 +0200, Didier Spaier a écrit : > > Le ven 29/10/2004 à 22:49, Frederick Ros a écrit : > > > Didier Spaier wrote : > > > | > > > | Should I try with another kernel ? Here follows the list of available > > > | kernels for my distro -- I remind you that Mandrake's kernels include a > > > | lot of patches. > > > > > > It would perhaps help to see if it's a kernel problem ..
> > Now I've installed a 2.4.25-9mdk kernel and everything works well, > > though I feel there are too many messages in the log when I plug in the > > modem. > > yep the bug for sending the DSP 3 times is due to hotplug, as long as > "more works", it's not better, but it works... > > > I tried rmmod eagle-usb && modprobe eagle-usb too : no problem. > fine > we still have to find the problem though Yes we do. Eventually I was even able to get a freeze with kernel 2.4.25.9mdk (see log appended) This occured after (first) startup this morning as modem never got operational : eaglectrl -d didn't work ; I unplugged the modem, got a lot of messages in the log, rmmod froze the system. SYS, Didier
Oct 30 08:04:01 localhost syslogd 1.4.1: restart. *** early startup messages deleted Oct 30 08:04:01 localhost kernel: usb.c: registered new driver usbdevfs Oct 30 08:04:01 localhost kernel: usb.c: registered new driver hub Oct 30 08:04:01 localhost kernel: usb-uhci.c: $Revision: 1.275 $ time 17:24:05 Sep 23 2004 Oct 30 08:04:01 localhost kernel: usb-uhci.c: High bandwidth mode enabled Oct 30 08:04:01 localhost kernel: usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 10 Oct 30 08:04:01 localhost kernel: usb-uhci.c: Detected 2 ports Oct 30 08:04:01 localhost kernel: usb.c: new USB bus registered, assigned bus number 1 Oct 30 08:04:01 localhost kernel: hub.c: USB hub found Oct 30 08:04:01 localhost kernel: hub.c: 2 ports detected Oct 30 08:04:01 localhost kernel: usb-uhci.c: v1.275:USB Universal Host Controller Interface driver Oct 30 08:04:01 localhost kernel: usbdevfs: remount parameter error Oct 30 08:04:01 localhost kernel: hub.c: new USB device 00:07.2-1, assigned address 2 Oct 30 08:04:01 localhost kernel: usb.c: USB device 2 (vend/prod 0x1110/0x9010) is not claimed by any active driver. Oct 30 08:04:01 localhost kernel: Adding Swap: 818960k swap-space (priority -1) Oct 30 08:04:01 localhost kernel: [eagle-usb] driver V2.0.0 loaded Oct 30 08:04:01 localhost kernel: usb.c: registered new driver eagle-usb Oct 30 08:04:01 localhost kernel: [eagle-usb] New pre-firmware modem detected Oct 30 08:04:01 localhost kernel: [eagle-usb] Uploading firmware.. Oct 30 08:04:01 localhost kernel: [eagle-usb] Binding eu_instance_t to USB 001/002 Oct 30 08:04:01 localhost kernel: usb.c: USB disconnect on device 00:07.2-1 address 2 Oct 30 08:04:01 localhost kernel: [eagle-usb] Pre-firmware modem removed Oct 30 08:04:01 localhost kernel: hub.c: new USB device 00:07.2-1, assigned address 3 Oct 30 08:04:01 localhost kernel: [eagle-usb] New USB ADSL device detected, waiting for DSP code... Oct 30 08:04:01 localhost kernel: [eagle-usb] created proc entry at : /proc/driver/eagle-usb/001-003 Oct 30 08:04:01 localhost kernel: [eagle-usb] ioctl EU_IO_OPTIONS received Oct 30 08:04:01 localhost last message repeated 2 times Oct 30 08:04:01 localhost kernel: [eagle-usb] ioctl EU_IO_DSP received Oct 30 08:04:01 localhost last message repeated 2 times Oct 30 08:04:01 localhost kernel: [eagle-usb] Loading DSP code to device... Oct 30 08:04:01 localhost kernel: [eagle-usb] DSP code successfully loaded to device Oct 30 08:04:01 localhost kernel: usb.c: registered new driver acm Oct 30 08:04:01 localhost kernel: acm.c: v0.21:USB Abstract Control Model driver for USB modems and ISDN adapters Oct 30 08:04:01 localhost kernel: usb-uhci.c: ENXIO 80000380, flags 0, urb d5e7f1e0, burb d5e7f560 Oct 30 08:04:01 localhost kernel: usb-uhci.c: ENXIO 80000380, flags 0, urb d5e7f560, burb d5e7f2e0 Oct 30 08:04:01 localhost kernel: usb-uhci.c: ENXIO 80000380, flags 0, urb d5e7f2e0, burb d5e7f560 Oct 30 08:04:01 localhost kernel: usb-uhci.c: ENXIO 80000380, flags 0, urb d5e7f2e0, burb d5e7f1e0 Oct 30 08:04:01 localhost kernel: usb-uhci.c: ENXIO 80000380, flags 0, urb d5e7f560, burb d5e7f1e0 *** messages deleted, mainly from fsck (ReiserFS being somehow verbose) Oct 30 08:03:48 localhost logger: Unknown option on line 27 <13>Oct 30 08:03:48 logger: Unknown option on line 28 Oct 30 08:03:48 localhost last message repeated 2 times Oct 30 08:03:48 localhost logger: Options successfully sent to driver. <13>Oct 30 08:03:48 logger: Using DSP code for POTS line Oct 30 08:03:48 localhost logger: Options successfully sent to driver. <13>Oct 30 08:03:48 logger: Using DSP code for POTS line Oct 30 08:03:48 localhost logger: Using DSP code for POTS line <13>Oct 30 08:03:48 logger: DSP code successfully loaded. Oct 30 08:03:49 localhost insmod: insmod: a module named acm already exists Oct 30 08:03:49 localhost insmod: insmod: a module named acm already exists Oct 30 08:03:49 localhost modprobe: modprobe: insmod /lib/modules/2.4.25-9mdk/kernel/drivers/usb/acm.o.gz failed <27>Oct 30 08:03:49 modprobe: modprobe: insmod acm failed Oct 30 08:03:49 localhost modprobe: modprobe: insmod /lib/modules/2.4.25-9mdk/kernel/drivers/usb/acm.o.gz failed <27>Oct 30 08:03:49 modprobe: modprobe: insmod acm failed Oct 30 08:03:49 localhost usb.agent[496]: ... can't load module acm Oct 30 08:03:49 localhost usb.agent[496]: missing kernel or user mode driver acm Oct 30 08:03:49 localhost usb.agent[500]: ... can't load module acm Oct 30 08:03:49 localhost usb.agent[500]: missing kernel or user mode driver acm *** other messages, not related to USB Oct 30 08:04:10 localhost kernel: usb-uhci.c: ENXIO 80000300, flags 0, urb d683ee40, burb d683edc0 Oct 30 08:04:10 localhost kernel: [EAGLE-USB] Failed to send ctrl urb (d683ee40) with err=-6 Oct 30 08:04:10 localhost kernel: [EAGLE-USB] Let's retry in 100ms *** miscellaneous messages *** now firewall startup Oct 30 08:05:15 localhost guarddog: Configuring iptables firewall now. Oct 30 08:05:15 localhost kernel: ip_tables: (C) 2000-2002 Netfilter core team Oct 30 08:05:15 localhost kernel: ip_conntrack version 2.1 (3071 buckets, 24568 max) - 320 bytes per conntrack Oct 30 08:05:16 localhost guarddog: Finished configuring firewall Oct 30 08:05:18 localhost kernel: DROPPED IN= OUT=eth0 SRC=81.57.28.169 DST=81.255.255.255 LEN=150 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=631 DPT=631 LEN=130 Oct 30 08:05:21 localhost kernel: DROPPED IN=eth0 OUT= MAC=00:60:4c:0f:b1:2e:00:60:4c:0f:b1:2f:08:00 SRC=62.193.232.92 DST=81.57.28.169 LEN=48 TOS=0x00 PREC=0x00 TTL=121 ID=10524 PROTO=TCP SPT=4476 DPT=22 SEQ=1715338093 ACK=1586403423 WINDOW=65535 RES=0x00 SYN URGP=0 OPT (020405B401010402) Oct 30 08:05:33 localhost gconfd (didier-2418): démarrage (version 2.4.0.1), pid 2418 utilisateur « didier » Oct 30 08:05:33 localhost gconfd (didier-2418): Adresse « xml:readonly:/etc/gconf/gconf.xml.mandatory » résolue vers une source de configuration en lecture seule à la position 0 Oct 30 08:05:33 localhost gconfd (didier-2418): Adresse « xml:readwrite:/home/didier/.gconf » résolue vers une source de configuration enregistrable à la position 1 Oct 30 08:05:33 localhost gconfd (didier-2418): Adresse « xml:readonly:/etc/gconf/gconf.xml.defaults » résolue vers une source de configuration en lecture seule à la position 2 Oct 30 08:05:49 localhost kernel: DROPPED IN= OUT=eth0 SRC=81.57.28.169 DST=81.255.255.255 LEN=150 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=631 DPT=631 LEN=130 Oct 30 08:06:20 localhost kernel: [EAGLE-USB] EU_IO_OPTIONS : Eth device already open. Oct 30 08:06:20 localhost kernel: DROPPED IN= OUT=eth0 SRC=81.57.28.169 DST=81.255.255.255 LEN=150 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=631 DPT=631 LEN=130 Oct 30 08:06:23 localhost kernel: DROPPED IN=eth0 OUT= MAC=00:60:4c:0f:b1:2e:00:60:4c:0f:b1:2f:08:00 SRC=81.39.225.55 DST=81.57.28.169 LEN=52 TOS=0x00 PREC=0x00 TTL=48 ID=2534 DF PROTO=TCP SPT=3955 DPT=135 SEQ=612817417 ACK=0 WINDOW=64800 RES=0x00 SYN URGP=0 OPT (020405A00103030001010402) Oct 30 08:06:26 localhost kernel: [EAGLE-USB] EU_IO_OPTIONS : Eth device already open. Oct 30 08:06:42 localhost kernel: DROPPED IN=eth0 OUT= MAC=00:60:4c:0f:b1:2e:00:60:4c:0f:b1:2f:08:00 SRC=81.57.169.98 DST=81.57.28.169 LEN=48 TOS=0x00 PREC=0x00 TTL=123 ID=2365 DF PROTO=TCP SPT=2339 DPT=135 SEQ=3504999215 ACK=0 WINDOW=65535 RES=0x00 SYN URGP=0 OPT (020405B401010402) Oct 30 08:06:45 localhost kernel: DROPPED IN=eth0 OUT= MAC=00:60:4c:0f:b1:2e:00:60:4c:0f:b1:2f:08:00 SRC=81.57.169.98 DST=81.57.28.169 LEN=48 TOS=0x00 PREC=0x00 TTL=123 ID=4082 DF PROTO=TCP SPT=2339 DPT=135 SEQ=3504999215 ACK=0 WINDOW=65535 RES=0x00 SYN URGP=0 OPT (020405B401010402) Oct 30 08:06:51 localhost kernel: DROPPED IN= OUT=eth0 SRC=81.57.28.169 DST=81.255.255.255 LEN=150 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=631 DPT=631 LEN=130 Oct 30 08:07:22 localhost kernel: DROPPED IN= OUT=eth0 SRC=81.57.28.169 DST=81.255.255.255 LEN=150 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=631 DPT=631 LEN=130 Oct 30 08:07:35 localhost kernel: usb-uhci.c: interrupt, status 3, frame# 761 Oct 30 08:07:35 localhost kernel: [eagle-usb] eu_irq : URB canceled by user. Oct 30 08:07:35 localhost kernel: [EAGLE-USB] eu_irq : Callback on unregistered interrupt handler! Oct 30 08:07:35 localhost kernel: usb.c: USB disconnect on device 00:07.2-1 address 3 Oct 30 08:07:35 localhost kernel: [EAGLE-USB] eu_irq : Callback on unregistered interrupt handler! Oct 30 08:07:35 localhost last message repeated 16 times Oct 30 08:07:35 localhost kernel: [eagle-usb] ADSL device removed Oct 30 08:07:35 localhost kernel: [EAGLE-USB] eu_irq : Callback on unregistered interrupt handler! Oct 30 08:07:39 localhost last message repeated 998 times Oct 30 08:07:39 localhost kernel: [eagle-usb] eu_irq : URB canceled by user. Oct 30 08:07:39 localhost kernel: [EAGLE-USB] eu_irq : Callback on unregistered interrupt handler! Oct 30 08:07:39 localhost last message repeated 30 times Oct 30 08:07:39 localhost kernel: [eagle-usb] eu_irq : URB canceled by user. Oct 30 08:07:39 localhost kernel: [EAGLE-USB] eu_irq : Callback on unregistered interrupt handler! Oct 30 08:07:39 localhost last message repeated 23 times Oct 30 08:07:39 localhost kernel: [eagle-usb] eu_irq : URB canceled by user. Oct 30 08:07:39 localhost kernel: [EAGLE-USB] eu_irq : Callback on unregistered interrupt handler! Oct 30 08:07:39 localhost last message repeated 54 times Oct 30 08:07:39 localhost kernel: [eagle-usb] eu_irq : URB canceled by user. Oct 30 08:07:39 localhost kernel: [EAGLE-USB] eu_irq : Callback on unregistered interrupt handler! Oct 30 08:07:39 localhost last message repeated 2 times Oct 30 08:07:39 localhost kernel: [eagle-usb] eu_irq : URB canceled by user. Oct 30 08:07:39 localhost kernel: [EAGLE-USB] eu_irq : Callback on unregistered interrupt handler! Oct 30 08:07:39 localhost last message repeated 24 times Oct 30 08:07:39 localhost kernel: [eagle-usb] eu_irq : URB canceled by user. Oct 30 08:07:39 localhost kernel: [EAGLE-USB] eu_irq : Callback on unregistered interrupt handler! Oct 30 08:07:40 localhost last message repeated 89 times Oct 30 08:07:40 localhost kernel: usb-uhci.c: interrupt, status 3, frame# 1673 Oct 30 08:07:40 localhost kernel: [EAGLE-USB] eu_irq : Callback on unregistered interrupt handler! Oct 30 08:07:45 localhost last message repeated 1252 times Oct 30 08:07:45 localhost kernel: usb-uhci.c: interrupt, status 3, frame# 541 Oct 30 08:07:45 localhost kernel: [EAGLE-USB] eu_irq : Callback on unregistered interrupt handler! Oct 30 08:07:50 localhost last message repeated 1252 times Oct 30 08:07:50 localhost kernel: usb-uhci.c: interrupt, status 3, frame# 1457 Oct 30 08:07:50 localhost kernel: [EAGLE-USB] eu_irq : Callback on unregistered interrupt handler! Oct 30 08:07:53 localhost last message repeated 739 times Oct 30 08:07:53 localhost kernel: hub.c: new USB device 00:07.2-1, assigned address 4 Oct 30 08:07:53 localhost kernel: [EAGLE-USB] eu_irq : Callback on unregistered interrupt handler! Oct 30 08:07:53 localhost last message repeated 7 times Oct 30 08:07:53 localhost kernel: [eagle-usb] New pre-firmware modem detected Oct 30 08:07:53 localhost kernel: [eagle-usb] Uploading firmware.. Oct 30 08:07:53 localhost kernel: [EAGLE-USB] eu_irq : Callback on unregistered interrupt handler! Oct 30 08:07:54 localhost last message repeated 317 times Oct 30 08:07:54 localhost kernel: [eagle-usb] Binding eu_instance_t to USB 001/004 Oct 30 08:07:54 localhost kernel: [EAGLE-USB] eu_irq : Callback on unregistered interrupt handler! Oct 30 08:07:54 localhost last message repeated 19 times Oct 30 08:07:54 localhost kernel: usb.c: USB disconnect on device 00:07.2-1 address 4 Oct 30 08:07:54 localhost kernel: [eagle-usb] Pre-firmware modem removed Oct 30 08:07:54 localhost kernel: [EAGLE-USB] eu_irq : Callback on unregistered interrupt handler! Oct 30 08:07:55 localhost last message repeated 166 times Oct 30 08:07:55 localhost kernel: usb-uhci.c: interrupt, status 3, frame# 325 Oct 30 08:07:55 localhost kernel: [EAGLE-USB] eu_irq : Callback on unregistered interrupt handler! Oct 30 08:07:56 localhost last message repeated 451 times Oct 30 08:07:56 localhost kernel: hub.c: new USB device 00:07.2-1, assigned address 5 Oct 30 08:07:56 localhost kernel: [EAGLE-USB] eu_irq : Callback on unregistered interrupt handler! Oct 30 08:07:57 localhost last message repeated 14 times Oct 30 08:07:57 localhost kernel: [eagle-usb] New USB ADSL device detected, waiting for DSP code... Oct 30 08:07:57 localhost kernel: [EAGLE-USB] eu_irq : Callback on unregistered interrupt handler! Oct 30 08:07:57 localhost kernel: [eagle-usb] created proc entry at : /proc/driver/eagle-usb/001-005 Oct 30 08:07:57 localhost kernel: [EAGLE-USB] eu_irq : Callback on unregistered interrupt handler! Oct 30 08:07:59 localhost last message repeated 691 times Oct 30 08:07:59 localhost logger: **ERROR** Unable to open /proc/bus/usb/001/004: errno=2 Oct 30 08:07:59 localhost logger: Can't find any post-firmware devices. Oct 30 08:07:59 localhost logger: But I've been able to find a pre-firmware one. Oct 30 08:07:59 localhost logger: Wow .. eagle-usb driver should have transform this in post-firmware... Oct 30 08:07:59 localhost kernel: [EAGLE-USB] eu_irq : Callback on unregistered interrupt handler! Oct 30 08:08:00 localhost last message repeated 91 times Oct 30 08:08:00 localhost kernel: usb-uhci.c: interrupt, status 3, frame# 1237 Oct 30 08:08:00 localhost kernel: [EAGLE-USB] eu_irq : Callback on unregistered interrupt handler! Oct 30 08:08:00 localhost last message repeated 80 times Oct 30 08:08:00 localhost kernel: usb-uhci.c: ENXIO 80000580, flags 0, urb d68819a0, burb d68818a0 Oct 30 08:08:00 localhost kernel: [EAGLE-USB] eu_irq : Callback on unregistered interrupt handler! Oct 30 08:08:01 localhost last message repeated 15 times Oct 30 08:08:01 localhost kernel: EAGLE-USB] eu_irq : Callback on unregistered interrupt handler! Oct 30 08:08:01 localhost kernel: [EAGLE-USB] eu_irq : Callback on unregistered interrupt handler! Oct 30 08:08:02 localhost last message repeated 524 times Oct 30 08:08:02 localhost logger: Unknown option on line 27 Oct 30 08:08:02 localhost logger: Unknown option on line 28 Oct 30 08:08:02 localhost logger: Unknown option on line 29 Oct 30 08:08:02 localhost logger: Unknown option on line 30 Oct 30 08:08:02 localhost logger: Unknown option on line 31 Oct 30 08:08:02 localhost logger: Unknown option on line 32 Oct 30 08:08:02 localhost kernel: [EAGLE-USB] eu_irq : Callback on unregistered interrupt handler! Oct 30 08:08:02 localhost last message repeated 2 times Oct 30 08:08:02 localhost kernel: [eagle-usb] ioctl EU_IO_OPTIONS received Oct 30 08:08:02 localhost kernel: [EAGLE-USB] eu_irq : Callback on unregistered interrupt handler! Oct 30 08:08:02 localhost last message repeated 2 times Oct 30 08:08:02 localhost kernel: [eagle-usb] ioctl EU_IO_DSP received Oct 30 08:08:02 localhost kernel: [EAGLE-USB] eu_irq : Callback on unregistered interrupt handler! Oct 30 08:08:02 localhost last message repeated 3 times Oct 30 08:08:02 localhost kernel: [eagle-usb] Loading DSP code to device... Oct 30 08:08:02 localhost kernel: [eagle-usb] DSP code successfully loaded to device Oct 30 08:08:02 localhost logger: Options successfully sent to driver. Oct 30 08:08:02 localhost logger: Using DSP code for POTS line Oct 30 08:08:02 localhost logger: DSP code successfully loaded. Oct 30 08:08:03 localhost kernel: [eagle-usb] eu_irq : URB canceled by user. Oct 30 08:08:03 localhost kernel: [EAGLE-USB] eu_irq : Callback on unregistered interrupt handler! Oct 30 08:08:03 localhost last message repeated 31 times Oct 30 08:08:03 localhost logger: Unknown option on line 27 Oct 30 08:08:03 localhost logger: Unknown option on line 28 Oct 30 08:08:03 localhost logger: Unknown option on line 29 Oct 30 08:08:03 localhost logger: Unknown option on line 30 Oct 30 08:08:03 localhost logger: Unknown option on line 31 Oct 30 08:08:03 localhost logger: Unknown option on line 32 Oct 30 08:08:03 localhost kernel: [EAGLE-USB] eu_irq : Callback on unregistered interrupt handler! Oct 30 08:08:03 localhost kernel: [EAGLE-USB] eu_irq : Callback on unregistered interrupt handler! Oct 30 08:08:03 localhost kernel: [eagle-usb] ioctl EU_IO_OPTIONS received Oct 30 08:08:03 localhost kernel: [EAGLE-USB] eu_irq : Callback on unregistered interrupt handler! Oct 30 08:08:03 localhost last message repeated 2 times Oct 30 08:08:03 localhost kernel: [eagle-usb] ioctl EU_IO_DSP received Oct 30 08:08:03 localhost kernel: [EAGLE-USB] eu_irq : Callback on unregistered interrupt handler! Oct 30 08:08:03 localhost last message repeated 3 times Oct 30 08:08:03 localhost kernel: [eagle-usb] Loading DSP code to device... Oct 30 08:08:03 localhost kernel: usb-uhci.c: ENXIO 40420580, flags 0, urb d6881ba0, burb d6881ba0 Oct 30 08:08:03 localhost kernel: [EAGLE-USB] Unable to submit interrupt URB! Oct 30 08:08:03 localhost kernel: [EAGLE-USB] eu_irq : Callback on unregistered interrupt handler! Oct 30 08:08:03 localhost logger: Unable to send DSP code to the modem: Input/output error Oct 30 08:08:03 localhost logger: Options successfully sent to driver. Oct 30 08:08:03 localhost logger: Using DSP code for POTS line Oct 30 08:08:03 localhost kernel: [EAGLE-USB] eu_irq : Callback on unregistered interrupt handler! Oct 30 08:08:03 localhost last message repeated 6 times Oct 30 08:08:03 localhost logger: Unknown option on line 27 Oct 30 08:08:03 localhost kernel: [EAGLE-USB] eu_irq : Callback on unregistered interrupt handler! Oct 30 08:08:04 localhost last message repeated 24 times Oct 30 08:08:04 localhost kernel: q : Callback on unregistered interrupt handler! Oct 30 08:08:04 localhost kernel: [EAGLE-USB] eu_irq : Callback on unregistered interrupt handler! Oct 30 08:08:04 localhost kernel: [EAGLE-USB] eu_irq : Callback on unregistered interrupt handler! Oct 30 08:08:04 localhost kernel: [eagle-usb] ioctl EU_IO_OPTIONS received Oct 30 08:08:04 localhost kernel: [EAGLE-USB] eu_irq : Callback on unregistered interrupt handler! Oct 30 08:08:04 localhost last message repeated 2 times Oct 30 08:08:04 localhost kernel: [eagle-usb] ioctl EU_IO_DSP received Oct 30 08:08:04 localhost kernel: [EAGLE-USB] eu_irq : Callback on unregistered interrupt handler! Oct 30 08:08:04 localhost last message repeated 236 times Oct 30 08:08:03 localhost logger: Unknown option on line 28 Oct 30 08:08:04 localhost logger: Unknown option on line 29 Oct 30 08:08:04 localhost logger: Unknown option on line 30 Oct 30 08:08:04 localhost logger: Unknown option on line 31 Oct 30 08:08:04 localhost logger: Unknown option on line 32 Oct 30 08:08:04 localhost logger: Unable to send DSP code to the modem: Unknown error 512 Oct 30 08:08:04 localhost logger: Options successfully sent to driver. Oct 30 08:08:04 localhost logger: Using DSP code for POTS line Oct 30 08:08:04 localhost kernel: [EAGLE-USB] eu_irq : Callback on unregistered interrupt handler! Oct 30 08:08:05 localhost last message repeated 225 times Oct 30 08:08:05 localhost kernel: usb-uhci.c: interrupt, status 3, frame# 104 Oct 30 08:08:05 localhost kernel: [EAGLE-USB] eu_irq : Callback on unregistered interrupt handler! Oct 30 08:08:10 localhost last message repeated 1252 times Oct 30 08:08:10 localhost kernel: usb-uhci.c: interrupt, status 3, frame# 1019 Oct 30 08:08:10 localhost kernel: [EAGLE-USB] eu_irq : Callback on unregistered interrupt handler! Oct 30 08:08:15 localhost last message repeated 1253 times Oct 30 08:08:15 localhost kernel: usb-uhci.c: interrupt, status 3, frame# 1935 Oct 30 08:08:15 localhost kernel: [EAGLE-USB] eu_irq : Callback on unregistered interrupt handler! Oct 30 08:08:20 localhost last message repeated 1252 times Oct 30 08:08:20 localhost kernel: usb-uhci.c: interrupt, status 3, frame# 802 Oct 30 08:08:20 localhost kernel: [EAGLE-USB] eu_irq : Callback on unregistered interrupt handler! Oct 30 08:08:25 localhost last message repeated 1253 times Oct 30 08:08:25 localhost kernel: usb-uhci.c: interrupt, status 3, frame# 1717 Oct 30 08:08:25 localhost kernel: [EAGLE-USB] eu_irq : Callback on unregistered interrupt handler! Oct 30 08:08:30 localhost last message repeated 1252 times Oct 30 08:08:30 localhost kernel: usb-uhci.c: interrupt, status 3, frame# 585 Oct 30 08:08:30 localhost kernel: [EAGLE-USB] eu_irq : Callback on unregistered interrupt handler! *** Not able to get the modem operational -- I tried a rmmod then freeze, two rightmost leds of the keybord blinking... .... => Ctl Alt Syst b - I'm used to that now :-) Oct 30 08:10:37 localhost syslogd 1.4.1: restart. *** early startup messages deleted Oct 30 08:10:38 localhost kernel: usb.c: registered new driver usbdevfs Oct 30 08:10:38 localhost kernel: usb.c: registered new driver hub Oct 30 08:10:38 localhost kernel: usb-uhci.c: $Revision: 1.275 $ time 17:24:05 Sep 23 2004 Oct 30 08:10:38 localhost kernel: usb-uhci.c: High bandwidth mode enabled Oct 30 08:10:38 localhost kernel: usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 10 Oct 30 08:10:38 localhost kernel: usb-uhci.c: Detected 2 ports Oct 30 08:10:38 localhost kernel: usb.c: new USB bus registered, assigned bus number 1 Oct 30 08:10:38 localhost kernel: hub.c: USB hub found Oct 30 08:10:38 localhost kernel: hub.c: 2 ports detected Oct 30 08:10:38 localhost kernel: usb-uhci.c: v1.275:USB Universal Host Controller Interface driver Oct 30 08:10:38 localhost kernel: usbdevfs: remount parameter error Oct 30 08:10:38 localhost kernel: hub.c: new USB device 00:07.2-1, assigned address 2 Oct 30 08:10:38 localhost kernel: usb.c: USB device 2 (vend/prod 0x1110/0x900f) is not claimed by any active driver. Oct 30 08:10:38 localhost kernel: usb-uhci.c: ENXIO 80000280, flags 0, urb d7264c40, burb d7264d40 Oct 30 08:10:38 localhost kernel: [eagle-usb] driver V2.0.0 loaded Oct 30 08:10:38 localhost kernel: usb.c: registered new driver eagle-usb Oct 30 08:10:38 localhost kernel: [eagle-usb] New USB ADSL device detected, waiting for DSP code... Oct 30 08:10:38 localhost kernel: [eagle-usb] created proc entry at : /proc/driver/eagle-usb/001-002 Oct 30 08:10:38 localhost kernel: [eagle-usb] ioctl EU_IO_OPTIONS received Oct 30 08:10:38 localhost last message repeated 2 times Oct 30 08:10:38 localhost kernel: [eagle-usb] ioctl EU_IO_DSP received Oct 30 08:10:38 localhost last message repeated 2 times Oct 30 08:10:38 localhost kernel: [eagle-usb] Loading DSP code to device... Oct 30 08:10:38 localhost kernel: [eagle-usb] DSP code successfully loaded to device Oct 30 08:10:38 localhost kernel: usb.c: registered new driver acm Oct 30 08:10:38 localhost kernel: acm.c: v0.21:USB Abstract Control Model driver for USB modems and ISDN adapters Oct 30 08:10:38 localhost kernel: ide0(3,71):Removing [73021 56136 0x0 SD]..done Oct 30 08:10:38 localhost kernel: ide0(3,71):There were 1 uncompleted unlinks/truncates. Completed Oct 30 08:10:38 localhost kernel: usb-uhci.c: ENXIO 80000280, flags 0, urb d7de0240, burb d6ce34e0 Oct 30 08:10:38 localhost kernel: usb-uhci.c: ENXIO 80000280, flags 0, urb d6ce34e0, burb d7de0240 Oct 30 08:10:38 localhost kernel: usb-uhci.c: ENXIO 80000280, flags 0, urb d6ce31e0, burb d7264f40 Oct 30 08:10:38 localhost kernel: usb-uhci.c: ENXIO 80000280, flags 0, urb d7264f40, burb d6ce31e0 *** some others messages deleted Oct 30 08:10:39 localhost kernel: [eagle-usb] Modem operational !! Oct 30 08:10:39 localhost kernel: [eagle-usb] Ethernet device eth0 created. *** Hurrah!
