From: FlashCode <[EMAIL PROTECTED]>Hi,
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: [ECI] Re: Topcom Webracer 850
Date: Sun, 15 Dec 2002 09:50:08 +0100
On Sun, 15 Dec 2002 09:43:58 +0100
"Bnny Cygnion" <[EMAIL PROTECTED]> wrote:
> Hi everyone,
> as I saw on the site , http://eciadsl.flashtux.org/support.php?lang=en ,
> the adsl usb modem Topcom Webracer 850 should be working under Linux.
>
> But I don't get it to work properly.
> I'm using RedHat 8.0 , kernel version 2.4.18-14, pppd version 2.4.1.
> This is what I do.
> I'm using the stable release (0.5-2).
Hi Bnny Cygnion,
As you can read here : http://eciadsl.flashtux.org/download.php?lang=en,
"EciAdsl stable version 0.5, 2002/05/15 :
This version supports only ECI HiFocus modems."
...and :
"Development version,
This version supports all Globespan based modems (see the modems page)"
(detail here : http://eciadslhttp://eciadsl.flashtux.org/modems.php?lang=en&modem=12)
So you must install CVS version in order to connect with your Topcom Webr@cer 850 under Linux
Have a nice install' ;)
I've did that. And again, I don't manage to get the modem to work.
I properly selected my modem, and configured my provider settings (Planet Internet was in the options).
But when I execute "startmodem", this is what I get :
<STARTMODEM>
setting up USB support (1/5)..
loading firmware (2/5)..
modem not found
</STARTMODEM>
When I run eci-doctor.sh, I get the following output :
<ECI-DOCTOR.SH>
You are using linux kernel version 2.4.18-14
Support for USB is OK
Preliminary USB device filesystem is OK
dabusb module is not loaded: OK
ehci-hcd module is not loaded: OK
UHCI support is OK
/dev/ppp is OK
HDLC support is OK
HDLC support is OK (no bug)
You are using pppd version (untested)
No existing PPP connection... trying to make one (please wait)
Couldn't get channel number: Input/output error
Waiting for 1 child processes...
script /usr/local/bin/pppoeci -vpi 8 -vci 35 -vendor 0x0915 -product 0x0002 -mode VCM_RFC2364, pid 1446
Script /usr/local/bin/pppoeci -vpi 8 -vci 35 -vendor 0x0915 -product 0x0002 -mode VCM_RFC2364 finished (pid 1446), status = 0xfb
Cannot make a PPP connection: Fatal
</ECI-DOCTOR.SH>
And finally,
when I probe my modem, I get this output :
<PROBEDEVICE>
WARNING: before probing, please ensure that your USB devices are plugged in
and that your system's USB support is properly configured
USB modem to probe must be UNinitialized, it will surely appear as an unknown
device (because it is not initialized yet), for instance: ? (0547:2131)
config read from /etc/eciadsl/eciadsl.conf
your USB devices:
1: USB UHCI Root Hub (0000:0000)
2: USB UHCI Root Hub (0000:0000)
3: USB-ADSL Modem / GlobeSpan Inc. (0915:8000)
enter device to probe (1-3): 3
probing, please wait..
your USB devices now:
1: USB UHCI Root Hub (0000:0000)
2: USB UHCI Root Hub (0000:0000)
3: USB-ADSL Modem / GlobeSpan Inc. (0915:8000)
probed USB device: USB-ADSL Modem
VID1=0915, PID1=8000
VID2=0915, PID2=8000
Did you really unplug/replug your modem before launching this script?
</PROBEDEVICE>
What must I do now, and in which order?
Thanks,
Benny
_________________________________________________________________
Chatten met je online vrienden via MSN Messenger. http://messenger.msn.nl/
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Driver Linux pour modem ECI ADSL USB: http://eciadsl.flashtux.org
Archives de cette liste de diffusion: http://liste.eci.free.fr
Pour se desinscrire: mailto:[EMAIL PROTECTED]?subject=unsubscribe
