> > 1/ Install the latest version (0.8) or CVS, but skip the configuration > process. Done.
> 2/ Now ensure that dabusb module is never loaded at startup > (echo dabusb >> /etc/hotplug/blacklist), reboot your RH system. Done. > 3/ Then: cat /proc/bus/usb/device > Are your modem VID and PID matching the ones at > http://eciadsl.flashtux.org/modems.php?lang=en ? They match exactly. > 4/ Anyway, configure now the driver (see the INSTALL file in /usr/local/doc/eciadsl) > and during this process, type in user-defined modem vid1/pid1 (enter whatever you > want for vid2/pid2). OK. > 5/ Now try startmodem. > If it successfully get the vid2/pid2, it will fail the following stage, but now you get > vid2/pid2 looking at /proc/bus/usb/devices. I get the following output from startmodem: [eciadsl-usermode-0.8]# startmodem setting up USB support (1/5).. loading firmware (2/5).. ECI load 1: failed ECI load 1: success firmware loaded successfully setting up modem (3/5).. can't find your GlobeSpan USB ADSL WAN Modem ECI load 2: failed failed to get synchronization which presumably means exactly what it says and it isn't going to work? which is a complete pain as it means I'll have to ditch linux and use this Windows piece of cr*p ;o((( oh well..... =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Driver Linux pour modem ECI ADSL USB: http://eciadsl.flashtux.org Archives de cette liste de diffusion: http://liste.eci.free.fr Pour se desinscrire: mailto:[EMAIL PROTECTED]
