Selon FlashCode <[EMAIL PROTECTED]>: > > On Thu, Nov 04, 2004 at 08:04:14AM +1000, daniel wrote: > > > > Hi All... > > > > Firstly.. I can't find any step by step documentation on how to setup > > pppoe with eciadsl so I'm not sure I've done everything right.. I've got > > a problem authenticating over pppoe.. I'll include details below: > > > > I've set up the eciadsl driver to connect using > > LLC_SNAP_RFC1483_BRIDGED_ETH_NO_FCS. I've told eciadsl that my isp uses > > dhcp. Also.. how do I know if my ISP uses dhcp? If I don't select dhcp > > my tap0 doesn't come up cleanly... > > > > I've installed kernel 2.6.9. It should be configured correctly, I've > > made sure that it has all the bits the readme/faq said I need.. > > > > Hi, > > Please try with version 0.10 (same config, but you need to create it again). > First uninstall v0.9 from your system. > > -- > Cordialement / Best regards > Sebastien. > If you use PPPoE, you don't need dhcp.
I have use the driver with tap0 and PPPoE but not with original script. I have a question related to tun0 dhcpcd reject the use of tun0 for routed IP as it is not an ethernet interface. Anybody know a way to make a dhcp client work with tun0? Gilles =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Driver Linux pour modem ECI ADSL USB: http://eciadsl.flashtux.org Archives de cette liste de diffusion: http://liste.eci.free.fr Pour se desinscrire: mailto:[EMAIL PROTECTED]
