Selon daniel <[EMAIL PROTECTED]>: > > On Thu, 2004-11-04 at 12:34 +0100, Gilles Espinasse wrote: > > If you use PPPoE, you don't need dhcp. > > Thanks Gilles - Just tried it without dhcp.. didn't get any further. > > What kernel are you using? I will give it a try with the same version as > yours. > > Regards, > > Daniel > According to v0.10 Changelog, the starting script was fixed for other than PPPoA modes.
I suppose Nortek version starting script had the same problem like V0.9. As I did not use the standard script for IPCop, I don't know exactly what the problem is. You could try to look at the diff from v0.10 to nortek version to see the difference. As many program names were changed, you may try to isolate more easily the changes by replacing in v0.10 : eciadsl-firmware with eci-load1 eciadsl-synch with eci-load2 eciadsl-pppoeci with pppoeci IPCop is kernel 2.4.27. It should support both v0.10 and nortek version in update-1.4.1test2 wich should go out today or tomorrow. If you can use a dedicated machine for firewall and connection share, you should be able to test with nortek version. Gilles =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Driver Linux pour modem ECI ADSL USB: http://eciadsl.flashtux.org Archives de cette liste de diffusion: http://liste.eci.free.fr Pour se desinscrire: mailto:[EMAIL PROTECTED]
