Hi Aravindh, Which platform are you using for running the network stack? You probably need a particular UNDI driver for your Ethernet card if you are not using simulator like NT32 platform.
Best Regards, Ting -----Original Message----- From: edk2-devel [mailto:[email protected]] On Behalf Of Aravindhlal G.S.S Sent: Friday, July 01, 2016 6:42 PM To: [email protected] Subject: [edk2] Error. The protocol 'gEfiIp4ConfigProtocolGuid' was required and not found Hi Experts, I am not able to config the Ethernet interface in UEFI shell. I am running Shell> teractive Shell v2.1 EDK II UEFI v2.40 (EDK II, 0x00010000) The drivers commands list the required driver, but #D is 0 and Type is "?". Am I missing any drivers to be installed ? If so could you please help in sharing the pointers ? T Y C I P F A DRV VERSION E G G #D #C DRIVER NAME IMAGE PATH === ======== = = = === === =================================== ========== 97 0000000A ? N N 0 0 Simple Network Protocol Driver Fv(A881D567-6CB0-4EEE-8435-2E72D33E45B5)/FvFile(A2F436EA-A127-4EF8-957C-8048606FF670) 9C 0000000A ? N N 0 0 IP4 CONFIG Network Service Driver Fv(A881D567-6CB0-4EEE-8435-2E72D33E45B5)/FvFile(26841BDE-920A-4E7A-9FBE-637F477143A6) 9D 0000000A ? N N 0 0 IP4 Network Service Driver Fv(A881D567-6CB0-4EEE-8435-2E72D33E45B5)/FvFile(9FB1A1F3-3B71-4324-B39A-745CBB015FFF) Appreciate your help. Thanks -Aravindh _______________________________________________ edk2-devel mailing list [email protected] https://lists.01.org/mailman/listinfo/edk2-devel _______________________________________________ edk2-devel mailing list [email protected] https://lists.01.org/mailman/listinfo/edk2-devel
