Hi Aravindh, It looks the problem is irrelevant to upper layer drivers including SNP, MNP, and others, but your UNDI driver does not manage your NIC card: F7 0000000A ? N N 0 0 UNDI32 Driver Fv(A881D567-6CB0-4EEE-8435-2E72D33E45B5)/FvFile(A1F436EA-A127-4EF8-957C-8048606FF670)
Is the UNDI driver the correct NIC device driver in UEFI? Best Regards, Ting -----Original Message----- From: edk2-devel [mailto:[email protected]] On Behalf Of Aravindhlal G.S.S Sent: Monday, July 04, 2016 12:39 PM To: Aravindhlal G.S.S <[email protected]>; Ye, Ting <[email protected]>; [email protected] Subject: Re: [edk2] Error. The protocol 'gEfiIp4ConfigProtocolGuid' was required and not found Sorry, Forgot to attach file in previous email. Attached in this email. Hi Ting, The chipset being used is Puma 7 DOCSIS 3.1 chip. I could also see the UNDI driver installed. Please see below. F7 0000000A ? N N 0 0 UNDI32 Driver Fv(A881D567-6CB0-4EEE-8435-2E72D33E45B5)/FvFile(A1F436EA-A127-4EF8-957C-8048606FF670) Please see the attached text file the output of drivers command. I tried following, but none of them worked. * I reset all the parameters/values to defaults * I tried reconnecting all the drivers * I tried to unload and then again load the driver using the handle * I tried to bind all drivers to a specific devices and start the driver * I tried to force defaults on all devices using "drvcfg -f 0" command Could you please take a look in the attached text file ? Still am I missing any drivers to be installed ? is there any way to reinstall the drivers (SNP, MNP & other network drivers) ? Appreciate your help ! Thanks -Aravindh -----Original Message----- From: Ye, Ting [mailto:[email protected]] Sent: Monday, July 04, 2016 7:12 AM To: Aravindhlal G.S.S; [email protected] Subject: RE: Error. The protocol 'gEfiIp4ConfigProtocolGuid' was required and not found Hi Aravindh, Which platform are you using for running the network stack? You probably need a particular UNDI driver for your Ethernet card if you are not using simulator like NT32 platform. Best Regards, Ting -----Original Message----- From: edk2-devel [mailto:[email protected]] On Behalf Of Aravindhlal G.S.S Sent: Friday, July 01, 2016 6:42 PM To: [email protected] Subject: [edk2] Error. The protocol 'gEfiIp4ConfigProtocolGuid' was required and not found Hi Experts, I am not able to config the Ethernet interface in UEFI shell. I am running Shell> teractive Shell v2.1 EDK II UEFI v2.40 (EDK II, 0x00010000) The drivers commands list the required driver, but #D is 0 and Type is "?". Am I missing any drivers to be installed ? If so could you please help in sharing the pointers ? T Y C I P F A DRV VERSION E G G #D #C DRIVER NAME IMAGE PATH === ======== = = = === === =================================== ========== 97 0000000A ? N N 0 0 Simple Network Protocol Driver Fv(A881D567-6CB0-4EEE-8435-2E72D33E45B5)/FvFile(A2F436EA-A127-4EF8-957C-8048606FF670) 9C 0000000A ? N N 0 0 IP4 CONFIG Network Service Driver Fv(A881D567-6CB0-4EEE-8435-2E72D33E45B5)/FvFile(26841BDE-920A-4E7A-9FBE-637F477143A6) 9D 0000000A ? N N 0 0 IP4 Network Service Driver Fv(A881D567-6CB0-4EEE-8435-2E72D33E45B5)/FvFile(9FB1A1F3-3B71-4324-B39A-745CBB015FFF) Appreciate your help. Thanks -Aravindh _______________________________________________ edk2-devel mailing list [email protected] https://lists.01.org/mailman/listinfo/edk2-devel _______________________________________________ edk2-devel mailing list [email protected] https://lists.01.org/mailman/listinfo/edk2-devel _______________________________________________ edk2-devel mailing list [email protected] https://lists.01.org/mailman/listinfo/edk2-devel
