> On Aug 10, 2016, at 11:02 AM, Kinney, Michael D <michael.d.kin...@intel.com> > wrote: > > > >> -----Original Message----- >> From: af...@apple.com [mailto:af...@apple.com] >> Sent: Wednesday, August 10, 2016 10:35 AM >> To: Kinney, Michael D <michael.d.kin...@intel.com> >> Cc: Zeng, Star <star.z...@intel.com>; edk2-devel <edk2-devel@lists.01.org> >> Subject: Re: [edk2] [MdeModulePkg] SetVirtualAddressMap() crashed due to >> DxeReportStatusCodeLib assuming the state of the BootService Memory at >> runtime. >> >> >>> On Aug 10, 2016, at 10:22 AM, Kinney, Michael D >>> <michael.d.kin...@intel.com> wrote: >>> >>> Hi Andrew, >>> >>> I am staring at the code. Something is not right here, but I am >>> concerned that there are use cases I am not considering yet. Here >>> is my analysis so far. >>> >>> Here are the lib instances I see: >>> (ignoring IntelFramework ones for the purposes of this discussion). >>> >>> MdeModulePkg\Library\DxeReportStatusCodeLib\DxeReportStatusCodeLib.inf(25): >>> LIBRARY_CLASS = ReportStatusCodeLib|DXE_CORE DXE_DRIVER DXE_RUNTIME_DRIVER >> DXE_SAL_DRIVER DXE_SMM_DRIVER UEFI_APPLICATION UEFI_DRIVER SMM_CORE >>> >>> MdeModulePkg\Library\PeiReportStatusCodeLib\PeiReportStatusCodeLib.inf(27): >>> LIBRARY_CLASS = ReportStatusCodeLib|SEC PEIM PEI_CORE >>> >>> >> MdeModulePkg\Library\RuntimeDxeReportStatusCodeLib\RuntimeDxeReportStatusCodeLib.inf( >> 23): >>> LIBRARY_CLASS = ReportStatusCodeLib|DXE_RUNTIME_DRIVER DXE_SAL_DRIVER >>> >>> MdeModulePkg\Library\SmmReportStatusCodeLib\SmmReportStatusCodeLib.inf(26): >>> LIBRARY_CLASS = ReportStatusCodeLib|DXE_SMM_DRIVER SMM_CORE >>> >>> MdePkg\Library\BaseReportStatusCodeLibNull\BaseReportStatusCodeLibNull.inf(23): >>> LIBRARY_CLASS = ReportStatusCodeLib >>> >>> * The BASE one that is a Null instance makes sense when disabling Report >>> Status >> Code. >>> * The PEI one makes sense for its module compatibility. >>> * The SMM one also makes sense its module compatibility. >>> * And the RuntimeDxe one also makes sense its module compatibility. >>> * The DXE one seems to be over specified and if we reduced its module >>> compatibility, the SMM and RuntimeDxe lib instances can be used to cover >>> those module types. >>> >>> When I look at the source code in DxeReportStatusCodeLib, I see comments >>> that describe the use case where a module is dispatched before the Report >>> Status Code Protocol is available. >>> >>> The use case you are describing is when the first call to Report Status >>> Code by a module occurs after ExitBootServices(). In that case, we >>> depend on the Boot Services table being zeroed to exit early. >>> >>> I agree that no component should depend on Boot Services table being >>> cleared to zeros at ExitBootServices(). It is legal from UEFI/PI spec >>> to not zero at all, or in your example, fill with a pattern other than >>> zeros. >>> >>> It appears that the use case of first call to Report Status Code after >>> ExitBootServices() is not covered by the DXE lib instance, and we have >>> just been getting lucky due to zeroing behavior of boot services table. >>> >>> I can think of a couple options: >>> >>> * Update DXE INF to remove the DXE Runtime, DXE SAL, SMM, SMM Core module >>> types. This may break platform builds if a platform is using this lib >>> mapping for modules of the types being removed. However, those could >>> be considered platform DSC bugs. >>> >>> * Update DXE lib instance to add ExitBootServices() and >>> SetVirtualAddressMap() >>> events. However, this would basically make the DXE lib instance the >>> same as the DXE Runtime instance and would increase size of non-RT >>> components. >>> >>> I would prefer the first option, but we would need to do some testing to >>> see how many platform DSC files break. >>> >> >> Mike, >> >> That seems to make the most sense, but I too was worried about compatibility. >> >> I tried adding the UefiRuntimeLib to just fail calls at Runtime, but that >> breaks the >> build as DXE_CORE does not support UefiRuntimeLib. >> >> I guess one option would be to only add the ExitBootServices event and fail >> calls at >> runtime? > > I agree this would remove the assumption that the boot services table is > zeroed. > However, the only way this function can be called after ExitBootServices() is > if the module is DXE_RUNTIME_DRIVER, DXE_SAL_DRIVER, or DXE_SMM_DRIVER. If a > module is one of these types and they call Report Status Code, then they would > want the status code to go out. The current behavior of this lib instance > silently ignores all status codes after ExitBootServices(). This silent > filtering > is not good, and may be a good reason to move ahead with the first option and > fix the platform DSC files. >
Mike, I have to admit the assumption that it works at runtime is how I hit this issue in the first place so I'm fine with restricting the usage. I guess the rule is: 1) For BootServices only libraries it is OK to map as Runtime Services as there is an assumption that the calls will only be made at boot services time. 2) For RuntimeServices libraries they should always work. I think the issue was a RT library that was coded with 1) assumptions. I have to admit I don't know that we do a good job of documenting this kind of thing. It also brings up the point of maybe it would be better to list fewer things as SMM from a security audit point of view. Maybe it would be worthing it to add runtime checks that fail for things marked SMM that are in bucket 1)? Thanks, Andrew Fish >> >> Thanks, >> >> Andrew Fish >> >>> Mike >>> >>>> -----Original Message----- >>>> From: edk2-devel [mailto:edk2-devel-boun...@lists.01.org] On Behalf Of >>>> Andrew Fish >>>> Sent: Tuesday, August 9, 2016 7:50 AM >>>> To: Zeng, Star <star.z...@intel.com> >>>> Cc: edk2-devel <edk2-devel@lists.01.org> >>>> Subject: Re: [edk2] [MdeModulePkg] SetVirtualAddressMap() crashed due to >>>> DxeReportStatusCodeLib assuming the state of the BootService Memory at >>>> runtime. >>>> >>>> >>>>> On Aug 8, 2016, at 7:26 PM, Zeng, Star <star.z...@intel.com> wrote: >>>>> >>>>> On 2016/8/9 10:07, Andrew Fish wrote: >>>>>> >>>>>>> On Aug 8, 2016, at 6:21 PM, Zeng, Star <star.z...@intel.com> wrote: >>>>>>> >>>>>>> Andrew, >>>>>>> >>>>>>> Should MdeModulePkg/Library/RuntimeDxeReportStatusCodeLib be used for >>>>>>> your case >>>> if there are really runtime status code reporting needed? >>>>>>> >>>>>> >>>>>> Star, >>>>>> >>>>>> If the Library instance does not fully support DXE_RUNTIME_DRIVER, why >>>>>> is it >>>> listed in the LIBRARY_CLASS as supported? >>>>> >>>>> This kind of library can support DXE_RUNTIME_DRIVER at boot time, for >>>>> example >>>> UefiHiiLib, UefiHiiServicesLib, UefiBootServicesTableLib, DxePcdLib and >>>> etc. >>>>> >>>> >>>> Star, >>>> >>>> I understand giving access to Boot Services resources to a Runtime Driver >>>> for its >>>> constructor. I think the difference here is the DxeReportStatusCodeLib is >> abstracting >>>> a runtime service, but not doing it in a way to really works properly at >>>> runtime >> in >>>> all cases. I would expect that a library abstraction a runtime feature >>>> would work >> at >>>> runtime. Which is why I ended up with a "bad" mapping in the first place. >>>> >>>> Thanks, >>>> >>>> Andrew Fish >>>> >>>>>> >>>>>> >>>> >> https://github.com/tianocore/edk2/blob/master/MdeModulePkg/Library/DxeReportStatusCod >>>> eLib/DxeReportStatusCodeLib.inf#L25 >>>>>> >>>>>> LIBRARY_CLASS = ReportStatusCodeLib|DXE_CORE DXE_DRIVER >>>> DXE_RUNTIME_DRIVER DXE_SAL_DRIVER DXE_SMM_DRIVER UEFI_APPLICATION >>>> UEFI_DRIVER >>>> SMM_CORE >>>>>> >>>>>> Actually I tried to add the UefiRuntimeDriverLib and the build failed as >>>> UefiRuntimeDriverLib was not supported for the DXE_CORE type. Maybe the >>>> bug is >> this >>>> library instance lists DXE_RUNTIME_DRIVER, DXE_SAL_DRIVER and >>>> DXE_SMM_DRIVER when >> it >>>> has special case code to support DXE_CORE? Maybe this library is trying to >>>> do too >>>> many things? >>>>>> >>>>>> What ReportStatusCodeLib would you recommend to link with RuntimeDxe >>>>>> driver: >>>> >> https://github.com/tianocore/edk2/blob/master/MdeModulePkg/Core/RuntimeDxe/RuntimeDxe >>>> .inf >>>>> >>>>> [LibraryClasses.common.DXE_CORE] >>>>> >>>> >> ReportStatusCodeLib|MdeModulePkg/Library/DxeReportStatusCodeLib/DxeReportStatusCodeLi >>>> b.inf >>>>> >>>>> [LibraryClasses.common.DXE_RUNTIME_DRIVER] >>>>> >>>> >> ReportStatusCodeLib|MdeModulePkg/Library/RuntimeDxeReportStatusCodeLib/RuntimeDxeRepo >>>> rtStatusCodeLib.inf >>>>> >>>>> [LibraryClasses.common.UEFI_DRIVER] >>>>> >>>> >> ReportStatusCodeLib|MdeModulePkg/Library/DxeReportStatusCodeLib/DxeReportStatusCodeLi >>>> b.inf >>>>> >>>>> [LibraryClasses.common.DXE_DRIVER] >>>>> >>>> >> ReportStatusCodeLib|MdeModulePkg/Library/DxeReportStatusCodeLib/DxeReportStatusCodeLi >>>> b.inf >>>>> >>>>> [LibraryClasses.common.UEFI_APPLICATION] >>>>> >>>> >> ReportStatusCodeLib|MdeModulePkg/Library/DxeReportStatusCodeLib/DxeReportStatusCodeLi >>>> b.inf >>>>> >>>>> Thanks, >>>>> Star >>>>> >>>>>> >>>>>> Thanks, >>>>>> >>>>>> Andrew Fish >>>>>> >>>>>>> Thanks, >>>>>>> Star >>>>>>> -----Original Message----- >>>>>>> From: edk2-devel [mailto:edk2-devel-boun...@lists.01.org] On Behalf Of >>>>>>> Andrew >>>> Fish >>>>>>> Sent: Tuesday, August 9, 2016 7:08 AM >>>>>>> To: edk2-devel <edk2-devel@lists.01.org> >>>>>>> Subject: [edk2] [MdeModulePkg] SetVirtualAddressMap() crashed due to >>>> DxeReportStatusCodeLib assuming the state of the BootService Memory at >>>> runtime. >>>>>>> >>>>>>> I was messing about with an ExitBootServices test that fills boot >>>>>>> services >> memory >>>> with 0xAFAFAFAFAFAFAFAF (It was Vincent's idea to use my Initials but it >>>> has the >>>> handy property of being a non-cononical address and causes on GP fault on >>>> X64) and >>>> SetVirtualAddressMap() started crashing. >>>>>>> >>>>>>> It looks like this code is assuming the 1st call to ReportStatus code >>>>>>> will not >>>> happen at runtime. This is not the case for the RuntimeDxe driver. >>>>>>> >>>> >> https://github.com/tianocore/edk2/blob/master/MdeModulePkg/Library/DxeReportStatusCod >>>> eLib/ReportStatusCodeLib.c#L43 >>>>>>> VOID >>>>>>> InternalGetReportStatusCode ( >>>>>>> VOID >>>>>>> ) >>>>>>> { >>>>>>> EFI_STATUS Status; >>>>>>> >>>>>>> if (mReportStatusCodeLibStatusCodeProtocol != NULL) { >>>>>>> return; >>>>>>> } >>>>>>> >>>>>>> // >>>>>>> // Check gBS just in case ReportStatusCode is called before gBS is >>>>>>> initialized. >>>>>>> // >>>>>>> if (gBS != NULL && gBS->LocateProtocol != NULL) { >>>>>>> Status = gBS->LocateProtocol (&gEfiStatusCodeRuntimeProtocolGuid, NULL, >> (VOID**) >>>> &mReportStatusCodeLibStatusCodeProtocol); >>>>>>> if (EFI_ERROR (Status)) { >>>>>>> mReportStatusCodeLibStatusCodeProtocol = NULL; >>>>>>> } >>>>>>> } >>>>>>> } >>>>>>> >>>>>>> I'm guessing this seems to work due >>>> >> to:https://github.com/tianocore/edk2/blob/master/MdeModulePkg/Core/Dxe/DxeMain/DxeMai >>>> n.c#L803 >>>>>>> >>>>>>> // >>>>>>> // Zero out the Boot Service Table >>>>>>> // >>>>>>> ZeroMem (gBS, sizeof (EFI_BOOT_SERVICES)); >>>>>>> >>>>>>> >>>>>>> Thus if I'm looking at this code correctly it only looks like it works >>>>>>> at >> Runtime >>>> since it is depending on the value of a boot services memory buffer not >>>> changing. >>>> This is not a valid assumption as that code is owned by the caller of >>>> ExitBootServices, so it should be legal for my test to change the value. >>>>>>> >>>>>>> I wanted to get a few more eyes on this prior to filling a bug? >>>>>>> >>>>>>> Thanks, >>>>>>> >>>>>>> Andrew Fish >>>>>>> >>>>>>> >>>>>>> _______________________________________________ >>>>>>> edk2-devel mailing list >>>>>>> edk2-devel@lists.01.org >>>>>>> https://lists.01.org/mailman/listinfo/edk2-devel >>>>>>> _______________________________________________ >>>>>>> edk2-devel mailing list >>>>>>> edk2-devel@lists.01.org >>>>>>> https://lists.01.org/mailman/listinfo/edk2-devel >>>>> >>>>> _______________________________________________ >>>>> edk2-devel mailing list >>>>> edk2-devel@lists.01.org >>>>> https://lists.01.org/mailman/listinfo/edk2-devel >>>> >>>> _______________________________________________ >>>> edk2-devel mailing list >>>> edk2-devel@lists.01.org >>>> https://lists.01.org/mailman/listinfo/edk2-devel _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel
