Hi Nate, Ben, After changing Windows -> Translation = CP437 in Putty, I can able to see proper Shell and BIOS setup. After Grub, I am not seeing OS installation Process. I have changed Kernal Parameters too.
May Linux Server Installation(via serial) use different character setting or baud rate?. Thanks, Dhanasekar On Mon, Jul 16, 2018 at 10:58 AM, Dhanasekar Jaganathan < [email protected]> wrote: > Hi Nate/ Ben, > > Thanks for the info. > > My host is Ubuntu system and I am using "minicom" for serial messages. > I will use putty with the values you mentioned. > I have been trying with different Kernel parameters (in grub.cfg) while > installing Ubuntu Server OS. > > I will update the result. > > Thanks, > Dhanasekar > > On Sat, Jul 14, 2018 at 10:48 AM, You, Benjamin <[email protected]> > wrote: > >> Hi Dhanasekar, >> >> The Coreboot UEFI Payload does support serial and terminal. As Nate said >> below, there may be some configuration issue causing the display not >> correctly >> formatted through serial terminal. >> >> I also agree with Nate that since your board does not have a VGA >> connection, >> you might have to configure Ubuntu to use serial console to monitor the >> boot >> process. >> >> Thanks, >> >> - ben >> >> > -----Original Message----- >> > From: edk2-devel [mailto:[email protected]] On Behalf Of >> > Desimone, Nathaniel L >> > Sent: Saturday, July 14, 2018 8:51 AM >> > To: Dhanasekar Jaganathan <[email protected]> >> > Cc: [email protected] >> > Subject: Re: [edk2] Reg: Intel Rangley Support in EDK >> > >> > Hi Dhanasekar, >> > >> > I don't know very much about coreboot or the coreboot UEFI payload, so I >> > won't be able to help you much with that. From what you mention in your >> > message it sounds like either the coreboot UEFI payload does not >> include the >> > TerminalDxe driver, there is a configuration issue with it. >> MinPlatformPkg is a >> > pure EDK2 only implementation that does not have any coreboot >> dependencies, >> > but it does not support Rangley at the moment. >> > >> > With regard to the setup menu graphical corruption, the setup menu uses >> the >> > CP437 character set, since the setup menu is often displayed using VGA >> text >> > mode, whereas most current terminal emulators assume UTF-8 encoding. To >> > make it render properly, use PuTTY and in the connection configuration >> under >> > Windows -> Translation change the remote character set to CP437. >> > >> > I suspect there are kernel parameters you will need to pass to make >> Ubuntu use >> > the serial port as the terminal, I suggest looking at Ubuntu >> documentation or >> > message boards. >> > >> > Thanks, >> > >> > Nate >> > >> > On 7/12/18, 10:21 PM, "edk2-devel on behalf of Dhanasekar Jaganathan" >> > <[email protected] on behalf of [email protected]> >> > wrote: >> > >> > Hi Nate, >> > >> > Thanks for the info. I will try this. >> > >> > My Rangley platform has no onboard or offboard vga support. Com Port / >> Serial >> > console is used for display and communication. >> > I am booting the platform by coreboot with UEFI payload. I am trying to >> install >> > Ubuntu server OS. >> > >> > When I boot into Shell, I am not seeing actually shell (graphics are >> not good) and >> > keystroke are working properly. >> > When I boot into EDK Setup, I am not getting proper setup page >> (graphics are >> > not good) and keystroke are not working. >> > >> > When I try to boot Ubuntu Server, I am getting below error, >> > >> > "error: no suitable video mode found. >> > Booting in blind mode" >> > >> > It seems I am missing some video/graphics settings in UEFI payload. If >> you know >> > the fix, Please provide me. >> > >> > Thanks, >> > Dhanasekar >> > >> > >> > >> > On Fri, Jul 13, 2018 at 7:14 AM, Desimone, Nathaniel L >> > <[email protected]> wrote: >> > Hi Dhanasekar, >> > >> > There is nothing pre-built and off-the-shelf ready today. But we do >> have a >> > generalized infrastructure for open source Intel UEFI platforms called >> > MinPlatformPkg. Please see the following: >> > >> > https://github.com/tianocore/edk2-platforms/tree/devel- >> > MinPlatform/Platform/Intel >> > >> > Notice that MinPlatformPkg requires a *OpenBoardPkg that supports the >> > desired platform. To my knowledge no one at Intel has looked at >> implementing >> > a RangleyOpenBoardPkg thus far. The focus has been on recently released >> > platforms, Rangley is 4 years old at this point. If you are so >> inclined, you are >> > welcome to try implementing a RangleyOpenBoardPkg. I would recommend >> > using KabylakeOpenBoardPkg as a starting point. >> > >> > Thanks, >> > Nate >> > >> > On 7/11/18, 8:52 PM, "edk2-devel on behalf of Dhanasekar Jaganathan" >> <edk2- >> > [email protected] on behalf of [email protected]> >> wrote: >> > >> > Hi, >> > >> > I have booted Intel Rangley / MohonPeak platform in coreboot with >> Intel >> > FSP. >> > I am unable to install UEFI OS in coreboot (sometime). >> > >> > EDK bios will install both UEFI and Legacy OS. >> > Does Open EDK supports Intel Rangley platform?. >> > Is code base available for Intel Rangely platform? >> > >> > >> > >> > Thanks, >> > Dhanasekar >> > _______________________________________________ >> > edk2-devel mailing list >> > [email protected] >> > https://lists.01.org/mailman/listinfo/edk2-devel >> > >> > >> > _______________________________________________ >> > edk2-devel mailing list >> > [email protected] >> > https://lists.01.org/mailman/listinfo/edk2-devel >> > > _______________________________________________ edk2-devel mailing list [email protected] https://lists.01.org/mailman/listinfo/edk2-devel
