Hi Nate, Ben,
Can you please provide me the steps to integrate FSP with latest EDK2 source ?. I didnt get clear steps from net (seems steps are compatible with latest source). Which are the changes I have to do in latest EDK2 source and in which location I have to copy FSP binary ?. My FSP version is 1.1. Please share me links or example projects. Thanks, dhanasekar On Wed, Jul 18, 2018 at 1:12 PM, You, Benjamin <[email protected]> wrote: > Hi, Dhanasekar, > > I see "console=tty0 console=ttyUSB0,115200n8" in your configuration. > > You might want to check if "ttyUSB0" matches what Linux kernel denotes > your serial port. > > I am not expert in Linux kernel so not exactly sure how to debug this. A > possible way may be trying to enable Linux serial output on a known good > BIOS with your board (if there is such a BIOS) first. > > Thanks, > > - ben > > > From: Dhanasekar Jaganathan [mailto:[email protected]] > > Sent: Wednesday, July 18, 2018 3:06 PM > > To: You, Benjamin <[email protected]> > > Cc: Desimone, Nathaniel L <[email protected]>; > [email protected] > > Subject: Re: [edk2] Reg: Intel Rangley Support in EDK > > > > Hi Ben, > > > > I have shared my grub.cfg below, > > > > if loadfont /boot/grub/font.pf2 ; then > > set gfxmode=auto > > insmod efi_gop > > insmod efi_uga > > insmod gfxterm > > terminal_output gfxterm > > fi > > > > set menu_color_normal=white/black > > set menu_color_highlight=black/light-gray > > > > set timeout=5 > > menuentry "Install Ubuntu Server" { > > set gfxpayload=keep > > #DJ linux /casper/vmlinuz boot=casper quiet --- > > linux /casper/vmlinuz file=/cdrom/preseed/ubuntu-server.seed > vga=normal console=tty0 console=ttyUSB0,115200n8 --- > > initrd /casper/initrd.gz > > } > > menuentry "OEM install (for manufacturers)" { > > set gfxpayload=keep > > linux /casper/vmlinuz boot=casper only-ubiquity quiet splash > oem-config/enable=true --- > > initrd /casper/initrd.gz > > } > > menuentry "Check disc for defects" { > > set gfxpayload=keep > > linux /casper/vmlinuz boot=casper integrity-check quiet splash > --- > > initrd /casper/initrd.gz > > } > > > > Thanks, > > Dhanasekar > > > > On Wed, Jul 18, 2018 at 11:28 AM, You, Benjamin <[email protected]> > wrote: > > Hi, Dhanasekar, > > > > Linux boot parameters allow specifying serial baudrate. An example would > be: > > earlycon=uart8250,mmio32,0xXXXXXXXX,115200n81 console=ttyS2,115200 > > > > Please make sure the serial device info (including MMIO or I/O address > and > > the device name) matches your platform in above settings. > > > > I guess character set is not an issue here since Linux only outputs > basic > > ASCII codes. > > > > Thanks, > > > > - ben > > > > > From: Dhanasekar Jaganathan [mailto:[email protected]] > > > Sent: Tuesday, July 17, 2018 9:32 PM > > > To: You, Benjamin <[email protected]> > > > Cc: Desimone, Nathaniel L <[email protected]>; > [email protected] > > > Subject: Re: [edk2] Reg: Intel Rangley Support in EDK > > > > > > Hi Nate, Ben, > > > > > > After changing Windows -> Translation = CP437 in Putty, I can able > to see proper Shell and BIOS setup. > > > After Grub, I am not seeing OS installation Process. I have changed > Kernal Parameters too. > > > > > > May Linux Server Installation(via serial) use different character > setting or baud rate?. > > > > > > Thanks, > > > Dhanasekar > > > > > > On Mon, Jul 16, 2018 at 10:58 AM, Dhanasekar Jaganathan < > [email protected]> wrote: > > > Hi Nate/ Ben, > > > > > > Thanks for the info. > > > > > > My host is Ubuntu system and I am using "minicom" for serial messages. > > > I will use putty with the values you mentioned. > > > I have been trying with different Kernel parameters (in grub.cfg) > while installing Ubuntu Server OS. > > > > > > I will update the result. > > > > > > Thanks, > > > Dhanasekar > > > > > > On Sat, Jul 14, 2018 at 10:48 AM, You, Benjamin < > [email protected]> wrote: > > > Hi Dhanasekar, > > > > > > The Coreboot UEFI Payload does support serial and terminal. As Nate > said > > > below, there may be some configuration issue causing the display not > correctly > > > formatted through serial terminal. > > > > > > I also agree with Nate that since your board does not have a VGA > connection, > > > you might have to configure Ubuntu to use serial console to monitor > the boot > > > process. > > > > > > Thanks, > > > > > > - ben > > > > > > > -----Original Message----- > > > > From: edk2-devel [mailto:[email protected]] On Behalf > Of > > > > Desimone, Nathaniel L > > > > Sent: Saturday, July 14, 2018 8:51 AM > > > > To: Dhanasekar Jaganathan <[email protected]> > > > > Cc: [email protected] > > > > Subject: Re: [edk2] Reg: Intel Rangley Support in EDK > > > > > > > > Hi Dhanasekar, > > > > > > > > I don't know very much about coreboot or the coreboot UEFI payload, > so I > > > > won't be able to help you much with that. From what you mention in > your > > > > message it sounds like either the coreboot UEFI payload does not > include the > > > > TerminalDxe driver, there is a configuration issue with it. > MinPlatformPkg is a > > > > pure EDK2 only implementation that does not have any coreboot > dependencies, > > > > but it does not support Rangley at the moment. > > > > > > > > With regard to the setup menu graphical corruption, the setup menu > uses the > > > > CP437 character set, since the setup menu is often displayed using > VGA text > > > > mode, whereas most current terminal emulators assume UTF-8 encoding. > To > > > > make it render properly, use PuTTY and in the connection > configuration under > > > > Windows -> Translation change the remote character set to CP437. > > > > > > > > I suspect there are kernel parameters you will need to pass to make > Ubuntu use > > > > the serial port as the terminal, I suggest looking at Ubuntu > documentation or > > > > message boards. > > > > > > > > Thanks, > > > > > > > > Nate > > > > > > > > On 7/12/18, 10:21 PM, "edk2-devel on behalf of Dhanasekar Jaganathan" > > > > <[email protected] on behalf of > [email protected]> > > > > wrote: > > > > > > > > Hi Nate, > > > > > > > > Thanks for the info. I will try this. > > > > > > > > My Rangley platform has no onboard or offboard vga support. Com Port > / Serial > > > > console is used for display and communication. > > > > I am booting the platform by coreboot with UEFI payload. I am trying > to install > > > > Ubuntu server OS. > > > > > > > > When I boot into Shell, I am not seeing actually shell (graphics are > not good) and > > > > keystroke are working properly. > > > > When I boot into EDK Setup, I am not getting proper setup page > (graphics are > > > > not good) and keystroke are not working. > > > > > > > > When I try to boot Ubuntu Server, I am getting below error, > > > > > > > > "error: no suitable video mode found. > > > > Booting in blind mode" > > > > > > > > It seems I am missing some video/graphics settings in UEFI payload. > If you know > > > > the fix, Please provide me. > > > > > > > > Thanks, > > > > Dhanasekar > > > > > > > > > > > > > > > > On Fri, Jul 13, 2018 at 7:14 AM, Desimone, Nathaniel L > > > > <[email protected]> wrote: > > > > Hi Dhanasekar, > > > > > > > > There is nothing pre-built and off-the-shelf ready today. But we do > have a > > > > generalized infrastructure for open source Intel UEFI platforms > called > > > > MinPlatformPkg. Please see the following: > > > > > > > > https://github.com/tianocore/edk2-platforms/tree/devel- > > > > MinPlatform/Platform/Intel > > > > > > > > Notice that MinPlatformPkg requires a *OpenBoardPkg that supports the > > > > desired platform. To my knowledge no one at Intel has looked at > implementing > > > > a RangleyOpenBoardPkg thus far. The focus has been on recently > released > > > > platforms, Rangley is 4 years old at this point. If you are so > inclined, you are > > > > welcome to try implementing a RangleyOpenBoardPkg. I would recommend > > > > using KabylakeOpenBoardPkg as a starting point. > > > > > > > > Thanks, > > > > Nate > > > > > > > > On 7/11/18, 8:52 PM, "edk2-devel on behalf of Dhanasekar Jaganathan" > <edk2- > > > > [email protected] on behalf of [email protected]> > wrote: > > > > > > > > Hi, > > > > > > > > I have booted Intel Rangley / MohonPeak platform in coreboot > with Intel > > > > FSP. > > > > I am unable to install UEFI OS in coreboot (sometime). > > > > > > > > EDK bios will install both UEFI and Legacy OS. > > > > Does Open EDK supports Intel Rangley platform?. > > > > Is code base available for Intel Rangely platform? > > > > > > > > > > > > > > > > Thanks, > > > > Dhanasekar > > > > _______________________________________________ > > > > edk2-devel mailing list > > > > [email protected] > > > > https://lists.01.org/mailman/listinfo/edk2-devel > > > > > > > > > > > > _______________________________________________ > > > > edk2-devel mailing list > > > > [email protected] > > > > https://lists.01.org/mailman/listinfo/edk2-devel > > > > > _______________________________________________ edk2-devel mailing list [email protected] https://lists.01.org/mailman/listinfo/edk2-devel
