Is there any proxy or firewall block the connection? Once you set the static Ip4Gateway via ifconfig shell command, please try to ping the gateway/remote address to check the connection.
Thanks, Jiaxin > -----Original Message----- > From: edk2-devel [mailto:[email protected]] On Behalf Of > Sivaraman Nainar > Sent: Saturday, August 4, 2018 5:46 PM > To: Wu, Jiaxin <[email protected]>; Ye, Ting <[email protected]>; Laszlo > Ersek <[email protected]>; [email protected] > Subject: Re: [edk2] reg: HTTP Request Failure over Internet > > Hello Jiaxin, > > We have tried both the methods and both failed. Do you have any other > recommendation? > > -Siva > -----Original Message----- > From: Wu, Jiaxin [mailto:[email protected]] > Sent: Tuesday, July 31, 2018 7:14 AM > To: Sivaraman Nainar; Ye, Ting; Laszlo Ersek; [email protected] > Subject: RE: [edk2] reg: HTTP Request Failure over Internet > > Hi Siva, > > Thanks the report. > > From the code review, it does the problem for HTTP protocol to route the > package over Internet. > > But I'm confused with your patch that how can you get the RouterAddr since > there is no interface for HTTP protocol to get the RouterAddr? > > > + HttpInstance->Tcp4->Routes ( > > + HttpInstance->Tcp4, > > + FALSE, > > + &HttpInstance->RemoteAddr, > > + &Tcp4AP->SubnetMask, > > + &HttpInstance->RouterAddr > > + ); > > + > > So, I prefer it's the UEFI Spec limitation that HTTP protocol doesn't provide > us > the interface to set the router info instead of setting it during HTTP > configuration. To mitigate the issue, below two solution/workaround can be > tried: > 1) Ip4Config2 protocol can be leveraged by your HTTP application to register > one valid Ip4Gateway into the default route table (just like HttpBootDxe -- > HttpBootRegisterIp4Gateway()). The IP policy will route the packet by using > the instance's route table first, if not found, the default route table will > be > tried. > 2) Set the static Ip4Gateway via ifconfig shell command. The Ip4Gateway > address also will be set to default route table. > > Thanks, > Jiaxin > > > > > -----Original Message----- > > From: edk2-devel [mailto:[email protected]] On Behalf Of > > Sivaraman Nainar > > Sent: Wednesday, July 25, 2018 5:29 PM > > To: Ye, Ting <[email protected]>; Laszlo Ersek <[email protected]>; > > edk2- [email protected] > > Subject: Re: [edk2] reg: HTTP Request Failure over Internet > > > > Ting: > > > > Please find the patch for reference. > > > > Index: HttpProto.c > > > ========================================================== > > ========= > > --- HttpProto.c > > +++ HttpProto.c > > @@ -622,12 +622,20 @@ > > Status = HttpInstance->Tcp4->Configure (HttpInstance->Tcp4, > Tcp4CfgData); > > if (EFI_ERROR (Status)) { > > DEBUG ((EFI_D_ERROR, "HttpConfigureTcp4 - %r\n", Status)); > > return Status; > > } > > > > + HttpInstance->Tcp4->Routes ( > > + HttpInstance->Tcp4, > > + FALSE, > > + &HttpInstance->RemoteAddr, > > + &Tcp4AP->SubnetMask, > > + &HttpInstance->RouterAddr > > + ); > > + > > Status = HttpCreateTcp4ConnCloseEvent (HttpInstance); > > if (EFI_ERROR (Status)) { > > return Status; > > } > > > > Status = HttpCreateTcp4TxEvent (Wrap); > > > > -Siva > > -----Original Message----- > > From: Ye, Ting [mailto:[email protected]] > > Sent: Wednesday, July 25, 2018 1:36 PM > > To: Laszlo Ersek; Sivaraman Nainar; [email protected] > > Subject: RE: [edk2] reg: HTTP Request Failure over Internet > > > > Hi Siva, > > > > I didn't receive your patch either. Thanks for reporting the issue, we > > will try to reproduce it firstly. > > > > Thanks, > > Ting > > > > -----Original Message----- > > From: edk2-devel [mailto:[email protected]] On Behalf Of > > Laszlo Ersek > > Sent: Tuesday, July 24, 2018 8:43 PM > > To: Sivaraman Nainar <[email protected]>; > > [email protected] > > Subject: Re: [edk2] reg: HTTP Request Failure over Internet > > > > On 07/24/18 14:05, Sivaraman Nainar wrote: > > > Hello all, > > > > > > When an application tried to download the remote file over internet > > > with > > the HTTP Get Request it getting failed. If we try via the Intranet > > then application downloads the target file. > > > > > > The remote file is available in the Apache server. With the attached > > > patch > > the download works fine in Internet and Intranet. > > > > > > Could you review the solution and feedback? > > > > The edk2-devel list software does not reflect attachments to subscribers. > > > > While I disagree with that practice in general -- it breaks > > conversations where people justifiedly post small attachments, such as > > PNG screenshots, compressed log files and such --, for posting patches > > specifically, please use git-format-patch and git-send-email. The > > patch should be in the body of the email (please do not copy&paste the > > patch though; that is guaranteed not to work -- please use the git tools). > > > > Official guidelines: > > > > https://github.com/tianocore/tianocore.github.io/wiki/EDK-II-Developme > > nt- > > Process > > > > Personal ones from yours truly: > > > > https://github.com/tianocore/tianocore.github.io/wiki/Laszlo's-unkempt > > -git- guide-for-edk2-contributors-and-maintainers > > > > Thanks, > > Laszlo > > _______________________________________________ > > edk2-devel mailing list > > [email protected] > > https://lists.01.org/mailman/listinfo/edk2-devel > > _______________________________________________ > > edk2-devel mailing list > > [email protected] > > https://lists.01.org/mailman/listinfo/edk2-devel > _______________________________________________ > edk2-devel mailing list > [email protected] > https://lists.01.org/mailman/listinfo/edk2-devel _______________________________________________ edk2-devel mailing list [email protected] https://lists.01.org/mailman/listinfo/edk2-devel
