Hello Jiaxin,

There is no firewall blocking this. The gateway and Remote IP is accessible 
from shell.

Thanks
Siva
-----Original Message-----
From: Wu, Jiaxin [mailto:jiaxin...@intel.com] 
Sent: Monday, August 6, 2018 1:35 PM
To: Sivaraman Nainar; Ye, Ting; Laszlo Ersek; edk2-devel@lists.01.org
Subject: RE: [edk2] reg: HTTP Request Failure over Internet

Is there any proxy or firewall block the connection? Once you set the static 
Ip4Gateway via ifconfig shell command, please try to ping the gateway/remote 
address to check the connection.

Thanks,
Jiaxin


> -----Original Message-----
> From: edk2-devel [mailto:edk2-devel-boun...@lists.01.org] On Behalf Of 
> Sivaraman Nainar
> Sent: Saturday, August 4, 2018 5:46 PM
> To: Wu, Jiaxin <jiaxin...@intel.com>; Ye, Ting <ting...@intel.com>; 
> Laszlo Ersek <ler...@redhat.com>; edk2-devel@lists.01.org
> Subject: Re: [edk2] reg: HTTP Request Failure over Internet
> 
> Hello Jiaxin,
> 
> We have tried both the methods and both failed. Do you have any other 
> recommendation?
> 
> -Siva
> -----Original Message-----
> From: Wu, Jiaxin [mailto:jiaxin...@intel.com]
> Sent: Tuesday, July 31, 2018 7:14 AM
> To: Sivaraman Nainar; Ye, Ting; Laszlo Ersek; edk2-devel@lists.01.org
> Subject: RE: [edk2] reg: HTTP Request Failure over Internet
> 
> Hi Siva,
> 
> Thanks the report.
> 
> From the code review, it does the problem for HTTP protocol to route 
> the package over Internet.
> 
> But I'm confused with your patch that how can you get the RouterAddr 
> since there is no interface for HTTP protocol to get the RouterAddr?
> 
> > +  HttpInstance->Tcp4->Routes (
> > +            HttpInstance->Tcp4,
> > +            FALSE,
> > +            &HttpInstance->RemoteAddr,
> > +            &Tcp4AP->SubnetMask,
> > +            &HttpInstance->RouterAddr
> > +            );
> > +
> 
> So, I prefer it's the UEFI Spec limitation that HTTP protocol doesn't 
> provide us the interface to set the router info instead of setting it 
> during HTTP configuration. To mitigate the issue,  below two 
> solution/workaround can be
> tried:
> 1) Ip4Config2 protocol can be leveraged by your HTTP application to 
> register one valid Ip4Gateway into the default route table (just like 
> HttpBootDxe -- HttpBootRegisterIp4Gateway()). The IP policy will route 
> the packet by using the instance's route table first, if not found, 
> the default route table will be tried.
> 2) Set the static Ip4Gateway via ifconfig shell command. The 
> Ip4Gateway address also will be set to default route table.
> 
> Thanks,
> Jiaxin
> 
> 
> 
> > -----Original Message-----
> > From: edk2-devel [mailto:edk2-devel-boun...@lists.01.org] On Behalf 
> > Of Sivaraman Nainar
> > Sent: Wednesday, July 25, 2018 5:29 PM
> > To: Ye, Ting <ting...@intel.com>; Laszlo Ersek <ler...@redhat.com>;
> > edk2- de...@lists.01.org
> > Subject: Re: [edk2] reg: HTTP Request Failure over Internet
> >
> > Ting:
> >
> > Please find the patch  for reference.
> >
> > Index: HttpProto.c
> >
> ==========================================================
> > =========
> > --- HttpProto.c
> > +++ HttpProto.c
> > @@ -622,12 +622,20 @@
> >    Status = HttpInstance->Tcp4->Configure (HttpInstance->Tcp4,
> Tcp4CfgData);
> >    if (EFI_ERROR (Status)) {
> >      DEBUG ((EFI_D_ERROR, "HttpConfigureTcp4 - %r\n", Status));
> >      return Status;
> >    }
> >
> > +  HttpInstance->Tcp4->Routes (
> > +            HttpInstance->Tcp4,
> > +            FALSE,
> > +            &HttpInstance->RemoteAddr,
> > +            &Tcp4AP->SubnetMask,
> > +            &HttpInstance->RouterAddr
> > +            );
> > +
> >    Status = HttpCreateTcp4ConnCloseEvent (HttpInstance);
> >    if (EFI_ERROR (Status)) {
> >      return Status;
> >    }
> >
> >    Status = HttpCreateTcp4TxEvent (Wrap);
> >
> > -Siva
> > -----Original Message-----
> > From: Ye, Ting [mailto:ting...@intel.com]
> > Sent: Wednesday, July 25, 2018 1:36 PM
> > To: Laszlo Ersek; Sivaraman Nainar; edk2-devel@lists.01.org
> > Subject: RE: [edk2] reg: HTTP Request Failure over Internet
> >
> > Hi Siva,
> >
> > I didn't receive your patch either. Thanks for reporting the issue, 
> > we will try to reproduce it firstly.
> >
> > Thanks,
> > Ting
> >
> > -----Original Message-----
> > From: edk2-devel [mailto:edk2-devel-boun...@lists.01.org] On Behalf 
> > Of Laszlo Ersek
> > Sent: Tuesday, July 24, 2018 8:43 PM
> > To: Sivaraman Nainar <sivaram...@amiindia.co.in>; 
> > edk2-devel@lists.01.org
> > Subject: Re: [edk2] reg: HTTP Request Failure over Internet
> >
> > On 07/24/18 14:05, Sivaraman Nainar wrote:
> > > Hello all,
> > >
> > > When an application tried to download the remote file over 
> > > internet with
> > the HTTP Get Request it getting failed. If we try via the Intranet 
> > then application downloads the target file.
> > >
> > > The remote file is available in the Apache server. With the 
> > > attached patch
> > the download works fine in Internet and Intranet.
> > >
> > > Could you review the solution and feedback?
> >
> > The edk2-devel list software does not reflect attachments to subscribers.
> >
> > While I disagree with that practice in general -- it breaks 
> > conversations where people justifiedly post small attachments, such 
> > as PNG screenshots, compressed log files and such --, for posting 
> > patches specifically, please use git-format-patch and 
> > git-send-email. The patch should be in the body of the email (please 
> > do not copy&paste the patch though; that is guaranteed not to work -- 
> > please use the git tools).
> >
> > Official guidelines:
> >
> > https://github.com/tianocore/tianocore.github.io/wiki/EDK-II-Develop
> > me
> > nt-
> > Process
> >
> > Personal ones from yours truly:
> >
> > https://github.com/tianocore/tianocore.github.io/wiki/Laszlo's-unkem
> > pt
> > -git- guide-for-edk2-contributors-and-maintainers
> >
> > Thanks,
> > Laszlo
> > _______________________________________________
> > edk2-devel mailing list
> > edk2-devel@lists.01.org
> > https://lists.01.org/mailman/listinfo/edk2-devel
> > _______________________________________________
> > edk2-devel mailing list
> > edk2-devel@lists.01.org
> > https://lists.01.org/mailman/listinfo/edk2-devel
> _______________________________________________
> edk2-devel mailing list
> edk2-devel@lists.01.org
> https://lists.01.org/mailman/listinfo/edk2-devel
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel

Reply via email to