Gentlemen, pardon the intrusion but I'm approaching a deadline and need to
attract a little attention to posts with the subject: [edk2] OVMF
networking for real this time
I noticed the two of you discussing this a few months ago:
On Thu, Jan 17, 2013 at 10:53 AM, Laszlo Ersek <ler...@redhat.com> wrote:
> On 01/17/13 16:00, Gerd Hoffmann wrote:
> >
> > I'm running ovmf with networking enabled and ipxe efi roms. Network
> > driver seems to work properly. In efi shell I can ifconfig the
> > interface with a static ip address and ping the default gateway.
>
> I tried something similar, but didn't get this far.
>
>
I also am using an ipxe based PXE boot payload in OVMF with -D
NETWORK_ENABLE. "ifconfig -s eth0 dhcp" appears to work but suspiciously
returns immediately with the PXE boot IP with *no* network traffic for the
dhcp handshake. (I would be thrilled if the dhcp lease negotiation during
the PXE boot was carried forward to uEFI, but doubt that this is actually
what is happening!)
In any case I canNOT ping the gateway after ifconfig. The error is:
"There is no route to the destination '192.168.1.1' from the source '<null
string>' was found."
I don't recall ever seeing routing table configs in uEFI - could someone
explain how the uEFI routing tables are setup?
GetServByPort.efi btw, works fine.
------------------------------------------------------------------------------
Try New Relic Now & We'll Send You this Cool Shirt
New Relic is the only SaaS-based application performance monitoring service
that delivers powerful full stack analytics. Optimize and monitor your
browser, app, & servers with just a few lines of code. Try New Relic
and get this awesome Nerd Life shirt! http://p.sf.net/sfu/newrelic_d2d_apr
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/edk2-devel
