Linaro have been carrying a few small patches in our tree for some months
now; they have proven valuable and stable, so we'd like to push them
upstream.
The first few patches configure the platforms with some simple default
values and some extra build options.
[PATCH 1/9] ArmPlatformPkg/ArmVExpressPkg: Add support for EDK2_OUT_DIR
build parameter
[PATCH 2/9] ArmPlatformPkg/ArmVExpressPkg: CTA15-A7: Allow
EDK2_SKIP_PEICORE to be specified at build time
[PATCH 3/9] ArmPlatformPkg/ArmVExpressPkg: CTA9x4: default to
EDK2_ARMVE_STANDALONE=1
There is a patch to fix shutdown on Versatile Express platforms:
[PATCH 4/9] ArmPlatformPkg/ArmVExpressPkg: add Shutdown support
There is a small fix for a case sensitivity problem in the ARM BDS:
[PATCH 5/9] ArmPlatformPkg/Bds: Make ".EFI" files recognizable as
Then there are some small improvements to the menu options in ARM BDS:
[PATCH 6/9] ArmPlatformPkg/Bds: use letters for hard coded boot menu
[PATCH 7/9] ArmPlatformPkg/Bds: Add Reboot and Shutdown options to
main menu
[PATCH 8/9] ArmPlatformPkg/Bds: show global FDT config in main menu
Finally, there is a larger patch to allow each boot configuration to
specify it's own Flattened Device Tree binary. This is important in our
automated build systems, because as the DTB evolves, our "master" image
may end up with a different DTB than the image under test.
[PATCH 9/9] ArmPlatformPkg/Bds: add local FDT config
Regards,
Ryan.
In-Reply-To:
------------------------------------------------------------------------------
This SF.net email is sponsored by Windows:
Build for Windows Store.
http://p.sf.net/sfu/windows-dev2dev
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/edk2-devel
