comments below On 08/28/14 17:40, Ard Biesheuvel wrote:
> This adds support for executing UEFI in a QEMU/mach-virt emulated environment. > The following assumptions are made about the target: > - DRAM base at 0x4000_0000, containing the device tree blob > - DRAM size at least 1 MB > - PL011 UART at 0x900_0000 > - ARM architected timer > - Cortex-A15 CPU (if built for 32-bit) > > The following information is retrieved from the device tree: > - GIC base addresses > - virtual timer interrupt > - RTC base address > - DRAM size, must be at least 128 MB > - virtio MMIO transports > > The device tree image is relocated and installed as a configuration table > so an EFI stub enabled kernel can be booted directly without the need for > a bootloader. > > Contributed-under: TianoCore Contribution Agreement 1.0 > Signed-off-by: Michael Casadevall <[email protected]> > Signed-off-by: Ard Biesheuvel <[email protected]> > --- > > At the special request of Laszlo, this is an updated version repost of the > last > patch in the Arm/Qemu series, as we got out of sync between delivering and > incorporating review feedback. It contains some suggested cleanups of the > .dsc/.fdf files, updated debug mask etc, with no substantial differences > otherwise. > > -- > Ard. > > > .../ArmVirtualizationPkg/ArmVirtualization.dsc.inc | 328 > +++++++++++++++++++++ > .../ArmVirtualizationPkg/ArmVirtualizationQemu.dsc | 246 ++++++++++++++++ > .../ArmVirtualizationPkg/ArmVirtualizationQemu.fdf | 313 ++++++++++++++++++++ > 3 files changed, 887 insertions(+) > create mode 100644 > ArmPlatformPkg/ArmVirtualizationPkg/ArmVirtualization.dsc.inc > create mode 100644 > ArmPlatformPkg/ArmVirtualizationPkg/ArmVirtualizationQemu.dsc > create mode 100644 > ArmPlatformPkg/ArmVirtualizationPkg/ArmVirtualizationQemu.fdf Good file names! > > diff --git a/ArmPlatformPkg/ArmVirtualizationPkg/ArmVirtualization.dsc.inc > b/ArmPlatformPkg/ArmVirtualizationPkg/ArmVirtualization.dsc.inc > new file mode 100644 > index 000000000000..d7315ac4d9c0 > --- /dev/null > +++ b/ArmPlatformPkg/ArmVirtualizationPkg/ArmVirtualization.dsc.inc > @@ -0,0 +1,328 @@ > +# > +# Copyright (c) 2011-2012, ARM Limited. All rights reserved. > +# Copyright (c) 2014, Linaro Limited. All rights reserved. > +# > +# This program and the accompanying materials > +# are licensed and made available under the terms and conditions of the BSD > License > +# which accompanies this distribution. The full text of the license may be > found at > +# http://opensource.org/licenses/bsd-license.php > +# > +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, > +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR > IMPLIED. > +# > +# > + > +[LibraryClasses.common] > +!if $(TARGET) == RELEASE > + DebugLib|MdePkg/Library/BaseDebugLibNull/BaseDebugLibNull.inf > + > UncachedMemoryAllocationLib|ArmPkg/Library/UncachedMemoryAllocationLib/UncachedMemoryAllocationLib.inf > +!else > + DebugLib|MdePkg/Library/BaseDebugLibSerialPort/BaseDebugLibSerialPort.inf > + > UncachedMemoryAllocationLib|ArmPkg/Library/DebugUncachedMemoryAllocationLib/DebugUncachedMemoryAllocationLib.inf I can see you restored this from the comment. Good. > +!endif > + > DebugPrintErrorLevelLib|MdePkg/Library/BaseDebugPrintErrorLevelLib/BaseDebugPrintErrorLevelLib.inf > + > + BaseLib|MdePkg/Library/BaseLib/BaseLib.inf > + > SynchronizationLib|MdePkg/Library/BaseSynchronizationLib/BaseSynchronizationLib.inf > + > PerformanceLib|MdePkg/Library/BasePerformanceLibNull/BasePerformanceLibNull.inf > + PrintLib|MdePkg/Library/BasePrintLib/BasePrintLib.inf > + > PeCoffGetEntryPointLib|MdePkg/Library/BasePeCoffGetEntryPointLib/BasePeCoffGetEntryPointLib.inf > + PeCoffLib|MdePkg/Library/BasePeCoffLib/BasePeCoffLib.inf > + IoLib|MdePkg/Library/BaseIoLibIntrinsic/BaseIoLibIntrinsic.inf > + > UefiDecompressLib|MdePkg/Library/BaseUefiDecompressLib/BaseUefiDecompressLib.inf > + CpuLib|MdePkg/Library/BaseCpuLib/BaseCpuLib.inf > + > + UefiLib|MdePkg/Library/UefiLib/UefiLib.inf > + HobLib|MdePkg/Library/DxeHobLib/DxeHobLib.inf > + > UefiRuntimeServicesTableLib|MdePkg/Library/UefiRuntimeServicesTableLib/UefiRuntimeServicesTableLib.inf > + DevicePathLib|MdePkg/Library/UefiDevicePathLib/UefiDevicePathLib.inf > + > UefiBootServicesTableLib|MdePkg/Library/UefiBootServicesTableLib/UefiBootServicesTableLib.inf > + > DxeServicesTableLib|MdePkg/Library/DxeServicesTableLib/DxeServicesTableLib.inf > + > UefiDriverEntryPoint|MdePkg/Library/UefiDriverEntryPoint/UefiDriverEntryPoint.inf > + > UefiApplicationEntryPoint|MdePkg/Library/UefiApplicationEntryPoint/UefiApplicationEntryPoint.inf > + HiiLib|MdeModulePkg/Library/UefiHiiLib/UefiHiiLib.inf > + > UefiHiiServicesLib|MdeModulePkg/Library/UefiHiiServicesLib/UefiHiiServicesLib.inf > + > + UefiRuntimeLib|MdePkg/Library/UefiRuntimeLib/UefiRuntimeLib.inf > + > + # > + # Allow dynamic PCDs > + # > + PcdLib|MdePkg/Library/DxePcdLib/DxePcdLib.inf > + > + # 1/123 faster than Stm or Vstm version > + #BaseMemoryLib|MdePkg/Library/BaseMemoryLib/BaseMemoryLib.inf > + BaseMemoryLib|ArmPkg/Library/BaseMemoryLibStm/BaseMemoryLibStm.inf > + > + # Networking Requirements > + NetLib|MdeModulePkg/Library/DxeNetLib/DxeNetLib.inf > + DpcLib|MdeModulePkg/Library/DxeDpcLib/DxeDpcLib.inf > + UdpIoLib|MdeModulePkg/Library/DxeUdpIoLib/DxeUdpIoLib.inf > + IpIoLib|MdeModulePkg/Library/DxeIpIoLib/DxeIpIoLib.inf > + > + # ARM Architectural Libraries > + > CacheMaintenanceLib|ArmPkg/Library/ArmCacheMaintenanceLib/ArmCacheMaintenanceLib.inf > + > DefaultExceptionHandlerLib|ArmPkg/Library/DefaultExceptionHandlerLib/DefaultExceptionHandlerLib.inf > + > CpuExceptionHandlerLib|MdeModulePkg/Library/CpuExceptionHandlerLibNull/CpuExceptionHandlerLibNull.inf > + ArmDisassemblerLib|ArmPkg/Library/ArmDisassemblerLib/ArmDisassemblerLib.inf > + DmaLib|ArmPkg/Library/ArmDmaLib/ArmDmaLib.inf > + ArmGicLib|ArmPkg/Drivers/ArmGic/ArmGicLib.inf > + > ArmPlatformStackLib|ArmPlatformPkg/Library/ArmPlatformStackLib/ArmPlatformStackLib.inf > + ArmSmcLib|ArmPkg/Library/ArmSmcLib/ArmSmcLib.inf > + > + > PlatformPeiLib|ArmPlatformPkg/ArmVirtualizationPkg/Library/PlatformPeiLib/PlatformPeiLib.inf > + > EfiResetSystemLib|ArmPlatformPkg/ArmVirtualizationPkg/Library/ResetSystemLib/ResetSystemLib.inf Okay. Two of our libs down. > + > + # ARM PL111 Lcd Driver > + > LcdPlatformLib|ArmPlatformPkg/ArmVExpressPkg/Library/PL111LcdArmVExpressLib/PL111LcdArmVExpressLib.inf > + # ARM PL031 RTC Driver > + > RealTimeClockLib|ArmPlatformPkg/Library/PL031RealTimeClockLib/PL031RealTimeClockLib.inf > + # ARM PL011 UART Driver > + PL011UartLib|ArmPlatformPkg/Drivers/PL011Uart/PL011Uart.inf > + > SerialPortLib|ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortLib.inf > + > SerialPortExtLib|ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortExtLib.inf > + > + # EBL Related Libraries > + EblCmdLib|ArmPlatformPkg/Library/EblCmdLib/EblCmdLib.inf > + EfiFileLib|EmbeddedPkg/Library/EfiFileLib/EfiFileLib.inf > + > EblAddExternalCommandLib|EmbeddedPkg/Library/EblAddExternalCommandLib/EblAddExternalCommandLib.inf > + EblNetworkLib|EmbeddedPkg/Library/EblNetworkLib/EblNetworkLib.inf > + > + # > + # Uncomment (and comment out the next line) For RealView Debugger. The > Standard IO window > + # in the debugger will show load and unload commands for symbols. You can > cut and paste this > + # into the command window to load symbols. We should be able to use a > script to do this, but > + # the version of RVD I have does not support scripts accessing system > memory. > + # > + > #PeCoffExtraActionLib|ArmPkg/Library/RvdPeCoffExtraActionLib/RvdPeCoffExtraActionLib.inf > + > PeCoffExtraActionLib|ArmPkg/Library/DebugPeCoffExtraActionLib/DebugPeCoffExtraActionLib.inf > + > #PeCoffExtraActionLib|MdePkg/Library/BasePeCoffExtraActionLibNull/BasePeCoffExtraActionLibNull.inf > + > + DebugAgentLib|MdeModulePkg/Library/DebugAgentLibNull/DebugAgentLibNull.inf > + > DebugAgentTimerLib|EmbeddedPkg/Library/DebugAgentTimerLibNull/DebugAgentTimerLibNull.inf > + > + # BDS Libraries > + BdsLib|ArmPkg/Library/BdsLib/BdsLib.inf > + FdtLib|EmbeddedPkg/Library/FdtLib/FdtLib.inf > + > +[LibraryClasses.common.SEC] > + PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf > + > ArmPlatformSecExtraActionLib|ArmPlatformPkg/Library/DebugSecExtraActionLib/DebugSecExtraActionLib.inf > + > ArmPlatformGlobalVariableLib|ArmPlatformPkg/Library/ArmPlatformGlobalVariableLib/Sec/SecArmPlatformGlobalVariableLib.inf > + > + > DebugAgentLib|ArmPkg/Library/DebugAgentSymbolsBaseLib/DebugAgentSymbolsBaseLib.inf > + > DefaultExceptionHandlerLib|ArmPkg/Library/DefaultExceptionHandlerLib/DefaultExceptionHandlerLibBase.inf > + > +[LibraryClasses.common.PEI_CORE] > + PcdLib|MdePkg/Library/PeiPcdLib/PeiPcdLib.inf > + HobLib|MdePkg/Library/PeiHobLib/PeiHobLib.inf > + PeiServicesLib|MdePkg/Library/PeiServicesLib/PeiServicesLib.inf > + > MemoryAllocationLib|MdePkg/Library/PeiMemoryAllocationLib/PeiMemoryAllocationLib.inf > + PeiCoreEntryPoint|MdePkg/Library/PeiCoreEntryPoint/PeiCoreEntryPoint.inf > + PerformanceLib|MdeModulePkg/Library/PeiPerformanceLib/PeiPerformanceLib.inf > + > ReportStatusCodeLib|MdeModulePkg/Library/PeiReportStatusCodeLib/PeiReportStatusCodeLib.inf > + > OemHookStatusCodeLib|MdeModulePkg/Library/OemHookStatusCodeLibNull/OemHookStatusCodeLibNull.inf > + > PeCoffGetEntryPointLib|MdePkg/Library/BasePeCoffGetEntryPointLib/BasePeCoffGetEntryPointLib.inf > + > UefiDecompressLib|MdePkg/Library/BaseUefiDecompressLib/BaseUefiDecompressLib.inf > + > ExtractGuidedSectionLib|MdePkg/Library/PeiExtractGuidedSectionLib/PeiExtractGuidedSectionLib.inf > + > + > ArmPlatformGlobalVariableLib|ArmPlatformPkg/Library/ArmPlatformGlobalVariableLib/Pei/PeiArmPlatformGlobalVariableLib.inf > + > PeiServicesTablePointerLib|ArmPlatformPkg/Library/PeiServicesTablePointerLib/PeiServicesTablePointerLib.inf > + > +[LibraryClasses.common.PEIM] > + PcdLib|MdePkg/Library/PeiPcdLib/PeiPcdLib.inf > + HobLib|MdePkg/Library/PeiHobLib/PeiHobLib.inf > + PeiServicesLib|MdePkg/Library/PeiServicesLib/PeiServicesLib.inf > + > MemoryAllocationLib|MdePkg/Library/PeiMemoryAllocationLib/PeiMemoryAllocationLib.inf > + PeimEntryPoint|MdePkg/Library/PeimEntryPoint/PeimEntryPoint.inf > + PerformanceLib|MdeModulePkg/Library/PeiPerformanceLib/PeiPerformanceLib.inf > + > ReportStatusCodeLib|MdeModulePkg/Library/PeiReportStatusCodeLib/PeiReportStatusCodeLib.inf > + > OemHookStatusCodeLib|MdeModulePkg/Library/OemHookStatusCodeLibNull/OemHookStatusCodeLibNull.inf > + > PeCoffGetEntryPointLib|MdePkg/Library/BasePeCoffGetEntryPointLib/BasePeCoffGetEntryPointLib.inf > + > PeiResourcePublicationLib|MdePkg/Library/PeiResourcePublicationLib/PeiResourcePublicationLib.inf > + > UefiDecompressLib|MdePkg/Library/BaseUefiDecompressLib/BaseUefiDecompressLib.inf > + > ExtractGuidedSectionLib|MdePkg/Library/PeiExtractGuidedSectionLib/PeiExtractGuidedSectionLib.inf > + > + > ArmPlatformGlobalVariableLib|ArmPlatformPkg/Library/ArmPlatformGlobalVariableLib/Pei/PeiArmPlatformGlobalVariableLib.inf > + > PeiServicesTablePointerLib|ArmPlatformPkg/Library/PeiServicesTablePointerLib/PeiServicesTablePointerLib.inf > + > +[LibraryClasses.common.DXE_CORE] > + HobLib|MdePkg/Library/DxeCoreHobLib/DxeCoreHobLib.inf > + > MemoryAllocationLib|MdeModulePkg/Library/DxeCoreMemoryAllocationLib/DxeCoreMemoryAllocationLib.inf > + DxeCoreEntryPoint|MdePkg/Library/DxeCoreEntryPoint/DxeCoreEntryPoint.inf > + > ReportStatusCodeLib|IntelFrameworkModulePkg/Library/DxeReportStatusCodeLibFramework/DxeReportStatusCodeLib.inf > + > ExtractGuidedSectionLib|MdePkg/Library/DxeExtractGuidedSectionLib/DxeExtractGuidedSectionLib.inf > + > UefiDecompressLib|MdePkg/Library/BaseUefiDecompressLib/BaseUefiDecompressLib.inf > + DxeServicesLib|MdePkg/Library/DxeServicesLib/DxeServicesLib.inf > + > PerformanceLib|MdeModulePkg/Library/DxeCorePerformanceLib/DxeCorePerformanceLib.inf > + > +[LibraryClasses.common.DXE_DRIVER] > + > ReportStatusCodeLib|IntelFrameworkModulePkg/Library/DxeReportStatusCodeLibFramework/DxeReportStatusCodeLib.inf > + DxeServicesLib|MdePkg/Library/DxeServicesLib/DxeServicesLib.inf > + > SecurityManagementLib|MdeModulePkg/Library/DxeSecurityManagementLib/DxeSecurityManagementLib.inf > + PerformanceLib|MdeModulePkg/Library/DxePerformanceLib/DxePerformanceLib.inf > + > MemoryAllocationLib|MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf > + > ArmPlatformGlobalVariableLib|ArmPlatformPkg/Library/ArmPlatformGlobalVariableLib/Dxe/DxeArmPlatformGlobalVariableLib.inf > + > +[LibraryClasses.common.UEFI_APPLICATION] > + > UefiDecompressLib|IntelFrameworkModulePkg/Library/BaseUefiTianoCustomDecompressLib/BaseUefiTianoCustomDecompressLib.inf > + PerformanceLib|MdeModulePkg/Library/DxePerformanceLib/DxePerformanceLib.inf > + > MemoryAllocationLib|MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf > + HiiLib|MdeModulePkg/Library/UefiHiiLib/UefiHiiLib.inf > + > +[LibraryClasses.common.UEFI_DRIVER] > + > ReportStatusCodeLib|IntelFrameworkModulePkg/Library/DxeReportStatusCodeLibFramework/DxeReportStatusCodeLib.inf > + > UefiDecompressLib|IntelFrameworkModulePkg/Library/BaseUefiTianoCustomDecompressLib/BaseUefiTianoCustomDecompressLib.inf > + > ExtractGuidedSectionLib|MdePkg/Library/DxeExtractGuidedSectionLib/DxeExtractGuidedSectionLib.inf > + PerformanceLib|MdeModulePkg/Library/DxePerformanceLib/DxePerformanceLib.inf > + DxeServicesLib|MdePkg/Library/DxeServicesLib/DxeServicesLib.inf > + > MemoryAllocationLib|MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf > + > +[LibraryClasses.common.DXE_RUNTIME_DRIVER] > + HobLib|MdePkg/Library/DxeHobLib/DxeHobLib.inf > + > MemoryAllocationLib|MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf > + > ReportStatusCodeLib|IntelFrameworkModulePkg/Library/DxeReportStatusCodeLibFramework/DxeReportStatusCodeLib.inf > + CapsuleLib|MdeModulePkg/Library/DxeCapsuleLibNull/DxeCapsuleLibNull.inf > + > +[LibraryClasses.ARM] > + # > + # It is not possible to prevent the ARM compiler for generic intrinsic > functions. > + # This library provides the instrinsic functions generate by a given > compiler. > + # [LibraryClasses.ARM] and NULL mean link this library into all ARM images. > + # > + NULL|ArmPkg/Library/CompilerIntrinsicsLib/CompilerIntrinsicsLib.inf > + > +[LibraryClasses.AARCH64] > + NULL|ArmPkg/Library/CompilerIntrinsicsLib/CompilerIntrinsicsLib.inf > + > + > +[BuildOptions] > + RVCT:RELEASE_*_*_CC_FLAGS = -DMDEPKG_NDEBUG > + > + GCC:RELEASE_*_*_CC_FLAGS = -DMDEPKG_NDEBUG > + > +################################################################################ > +# > +# Pcd Section - list of all EDK II PCD Entries defined by this Platform > +# > +################################################################################ > + > +[PcdsFeatureFlag.common] > + gEfiMdePkgTokenSpaceGuid.PcdComponentNameDisable|TRUE > + gEfiMdePkgTokenSpaceGuid.PcdDriverDiagnosticsDisable|TRUE > + gEfiMdePkgTokenSpaceGuid.PcdComponentName2Disable|TRUE > + gEfiMdePkgTokenSpaceGuid.PcdDriverDiagnostics2Disable|TRUE > + > + # > + # Control what commands are supported from the UI > + # Turn these on and off to add features or save size > + # > + gEmbeddedTokenSpaceGuid.PcdEmbeddedMacBoot|TRUE > + gEmbeddedTokenSpaceGuid.PcdEmbeddedDirCmd|TRUE > + gEmbeddedTokenSpaceGuid.PcdEmbeddedHobCmd|TRUE > + gEmbeddedTokenSpaceGuid.PcdEmbeddedHwDebugCmd|TRUE > + gEmbeddedTokenSpaceGuid.PcdEmbeddedPciDebugCmd|TRUE > + gEmbeddedTokenSpaceGuid.PcdEmbeddedIoEnable|FALSE > + gEmbeddedTokenSpaceGuid.PcdEmbeddedScriptCmd|FALSE > + > + gEmbeddedTokenSpaceGuid.PcdCacheEnable|TRUE > + > + # Use the Vector Table location in CpuDxe. We will not copy the Vector > Table at PcdCpuVectorBaseAddress > + gArmTokenSpaceGuid.PcdRelocateVectorTable|FALSE > + > + gEmbeddedTokenSpaceGuid.PcdPrePiProduceMemoryTypeInformationHob|TRUE > + > + gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport|TRUE > + > +[PcdsFixedAtBuild.common] > + gArmPlatformTokenSpaceGuid.PcdFirmwareVendor|"ARM Versatile Express" > + > + gEmbeddedTokenSpaceGuid.PcdEmbeddedPrompt|"VExpress" > + gEfiMdePkgTokenSpaceGuid.PcdMaximumUnicodeStringLength|1000000 > + gEfiMdePkgTokenSpaceGuid.PcdMaximumAsciiStringLength|1000000 > + gEfiMdePkgTokenSpaceGuid.PcdMaximumLinkedListLength|1000000 > + gEfiMdePkgTokenSpaceGuid.PcdSpinLockTimeout|10000000 > + gEfiMdePkgTokenSpaceGuid.PcdDebugClearMemoryValue|0xAF > + gEfiMdePkgTokenSpaceGuid.PcdPerformanceLibraryPropertyMask|1 > + gEfiMdePkgTokenSpaceGuid.PcdPostCodePropertyMask|0 > + gEfiMdePkgTokenSpaceGuid.PcdUefiLibMaxPrintBufferSize|320 > + > + # DEBUG_ASSERT_ENABLED 0x01 > + # DEBUG_PRINT_ENABLED 0x02 > + # DEBUG_CODE_ENABLED 0x04 > + # CLEAR_MEMORY_ENABLED 0x08 > + # ASSERT_BREAKPOINT_ENABLED 0x10 > + # ASSERT_DEADLOOP_ENABLED 0x20 > +!if $(TARGET) == RELEASE > + gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask|0x21 > +!else > + gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask|0x2f > +!endif > + > + # DEBUG_INIT 0x00000001 // Initialization > + # DEBUG_WARN 0x00000002 // Warnings > + # DEBUG_LOAD 0x00000004 // Load events > + # DEBUG_FS 0x00000008 // EFI File system > + # DEBUG_POOL 0x00000010 // Alloc & Free's > + # DEBUG_PAGE 0x00000020 // Alloc & Free's > + # DEBUG_INFO 0x00000040 // Verbose > + # DEBUG_DISPATCH 0x00000080 // PEI/DXE Dispatchers > + # DEBUG_VARIABLE 0x00000100 // Variable > + # DEBUG_BM 0x00000400 // Boot Manager > + # DEBUG_BLKIO 0x00001000 // BlkIo Driver > + # DEBUG_NET 0x00004000 // SNI Driver > + # DEBUG_UNDI 0x00010000 // UNDI Driver > + # DEBUG_LOADFILE 0x00020000 // UNDI Driver > + # DEBUG_EVENT 0x00080000 // Event messages > + # DEBUG_GCD 0x00100000 // Global Coherency Database changes > + # DEBUG_CACHE 0x00200000 // Memory range cachability changes > + # DEBUG_ERROR 0x80000000 // Error > + # gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel|0x8000000F Thanks for commenting this out. > + > + gEfiMdePkgTokenSpaceGuid.PcdReportStatusCodePropertyMask|0x07 > + > + gEmbeddedTokenSpaceGuid.PcdEmbeddedAutomaticBootCommand|"" > + gEmbeddedTokenSpaceGuid.PcdEmbeddedDefaultTextColor|0x07 > + gEmbeddedTokenSpaceGuid.PcdEmbeddedMemVariableStoreSize|0x10000 > + > + # > + # Optional feature to help prevent EFI memory map fragments > + # Turned on and off via: PcdPrePiProduceMemoryTypeInformationHob > + # Values are in EFI Pages (4K). DXE Core will make sure that > + # at least this much of each type of memory can be allocated > + # from a single memory range. This way you only end up with > + # maximum of two fragements for each type in the memory map > + # (the memory used, and the free memory that was prereserved > + # but not used). > + # > + gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiACPIReclaimMemory|0 > + gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiACPIMemoryNVS|0 > + gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiReservedMemoryType|0 > + gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiRuntimeServicesData|50 > + gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiRuntimeServicesCode|20 > + gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiBootServicesCode|400 > + gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiBootServicesData|20000 > + gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiLoaderCode|20 > + gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiLoaderData|0 > + > + # > + # ARM Pcds > + # > + gArmTokenSpaceGuid.PcdArmUncachedMemoryMask|0x0000000000000000 > + > +[Components.common] > + # > + # Networking stack > + # > + MdeModulePkg/Universal/Network/DpcDxe/DpcDxe.inf > + MdeModulePkg/Universal/Network/ArpDxe/ArpDxe.inf > + MdeModulePkg/Universal/Network/Dhcp4Dxe/Dhcp4Dxe.inf > + MdeModulePkg/Universal/Network/Ip4ConfigDxe/Ip4ConfigDxe.inf > + MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Dxe.inf > + MdeModulePkg/Universal/Network/MnpDxe/MnpDxe.inf > + MdeModulePkg/Universal/Network/VlanConfigDxe/VlanConfigDxe.inf > + MdeModulePkg/Universal/Network/Mtftp4Dxe/Mtftp4Dxe.inf > + MdeModulePkg/Universal/Network/Tcp4Dxe/Tcp4Dxe.inf > + MdeModulePkg/Universal/Network/Udp4Dxe/Udp4Dxe.inf > + MdeModulePkg/Universal/Network/UefiPxeBcDxe/UefiPxeBcDxe.inf > + MdeModulePkg/Universal/Network/IScsiDxe/IScsiDxe.inf > diff --git a/ArmPlatformPkg/ArmVirtualizationPkg/ArmVirtualizationQemu.dsc > b/ArmPlatformPkg/ArmVirtualizationPkg/ArmVirtualizationQemu.dsc > new file mode 100644 > index 000000000000..f1ed0a713546 > --- /dev/null > +++ b/ArmPlatformPkg/ArmVirtualizationPkg/ArmVirtualizationQemu.dsc > @@ -0,0 +1,246 @@ > +# > +# Copyright (c) 2011-2013, ARM Limited. All rights reserved. > +# Copyright (c) 2014, Linaro Limited. All rights reserved. > +# > +# This program and the accompanying materials > +# are licensed and made available under the terms and conditions of the BSD > License > +# which accompanies this distribution. The full text of the license may be > found at > +# http://opensource.org/licenses/bsd-license.php > +# > +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, > +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR > IMPLIED. > +# > +# > + > +################################################################################ > +# > +# Defines Section - statements that will be processed to create a Makefile. > +# > +################################################################################ > +[Defines] > + PLATFORM_NAME = ArmVirtualizationQemu > + PLATFORM_GUID = 37d7e986-f7e9-45c2-8067-e371421a626c > + PLATFORM_VERSION = 0.1 > + DSC_SPECIFICATION = 0x00010005 > + OUTPUT_DIRECTORY = Build/ArmVirtualizationQemu > + SUPPORTED_ARCHITECTURES = AARCH64|ARM > + BUILD_TARGETS = DEBUG|RELEASE > + SKUID_IDENTIFIER = DEFAULT > + FLASH_DEFINITION = > ArmPlatformPkg/ArmVirtualizationPkg/ArmVirtualizationQemu.fdf > + > +!include ArmPlatformPkg/ArmVirtualizationPkg/ArmVirtualization.dsc.inc > + > +[LibraryClasses.AARCH64] > + ArmLib|ArmPkg/Library/ArmLib/AArch64/AArch64Lib.inf > + ArmCpuLib|ArmPkg/Drivers/ArmCpuLib/ArmCortexAEMv8Lib/ArmCortexAEMv8Lib.inf > + > +[LibraryClasses.ARM] > + ArmLib|ArmPkg/Library/ArmLib/ArmV7/ArmV7Lib.inf > + ArmCpuLib|ArmPkg/Drivers/ArmCpuLib/ArmCortexA15Lib/ArmCortexA15Lib.inf > + > +[LibraryClasses.common] > + # Virtio Support > + VirtioLib|OvmfPkg/Library/VirtioLib/VirtioLib.inf > + > VirtioMmioDeviceLib|OvmfPkg/Library/VirtioMmioDeviceLib/VirtioMmioDeviceLib.inf > + > + > ArmPlatformLib|ArmPlatformPkg/ArmVirtualizationPkg/Library/ArmVirtualizationPlatformLib/ArmVirtualizationPlatformLib.inf > + > ArmPlatformSysConfigLib|ArmPlatformPkg/ArmVirtualizationPkg/Library/ArmVirtualizationPlatformSysConfigLib/ArmVirtualizationPlatformSysConfigLib.inf Alright, four of our libs down. > + > + TimerLib|ArmPkg/Library/ArmArchTimerLib/ArmArchTimerLib.inf > + > +[LibraryClasses.AARCH64.SEC] > + ArmLib|ArmPkg/Library/ArmLib/AArch64/AArch64LibSec.inf > + > +[LibraryClasses.ARM.SEC] > + ArmLib|ArmPkg/Library/ArmLib/ArmV7/ArmV7LibSec.inf > + > +[BuildOptions] > + GCC:*_*_*_PLATFORM_FLAGS == > -I$(WORKSPACE)/ArmPlatformPkg/ArmVirtualizationPkg/Include > + > + > +################################################################################ > +# > +# Pcd Section - list of all EDK II PCD Entries defined by this Platform > +# > +################################################################################ > + > +[PcdsFeatureFlag.common] > + > + ## If TRUE, Graphics Output Protocol will be installed on virtual handle > created by ConsplitterDxe. > + # It could be set FALSE to save size. > + gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport|FALSE > + > + gArmTokenSpaceGuid.PcdArmArchTimerUseVirtual|TRUE > + > +[PcdsFixedAtBuild.common] > + gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel|0x8000004F > + > + gArmPlatformTokenSpaceGuid.PcdFirmwareVendor|"QEMU" > + gEmbeddedTokenSpaceGuid.PcdEmbeddedPrompt|"QEMU" > + > + gArmPlatformTokenSpaceGuid.PcdCoreCount|1 > +!if $(ARCH) == AARCH64 > + gArmTokenSpaceGuid.PcdVFPEnabled|1 > +!endif > + > + gArmPlatformTokenSpaceGuid.PcdCPUCoresStackBase|0x4007c000 > + gArmPlatformTokenSpaceGuid.PcdCPUCorePrimaryStackSize|0x4000 > + > + # Size of the region used by UEFI in permanent memory (Reserved 64MB) > + gArmPlatformTokenSpaceGuid.PcdSystemMemoryUefiRegionSize|0x04000000 > + > + # > + # ARM Pcds > + # > + gArmTokenSpaceGuid.PcdArmUncachedMemoryMask|0x0000000040000000 > + > + ## Trustzone enable (to make the transition from EL3 to EL2 in > ArmPlatformPkg/Sec) > + gArmTokenSpaceGuid.PcdTrustzoneSupport|FALSE > + > + # > + # ARM PrimeCell > + # > + > + ## PL011 - Serial Terminal > + gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x9000000 > + gEfiMdePkgTokenSpaceGuid.PcdUartDefaultBaudRate|38400 > + > + # > + # ARM OS Loader > + # > + gArmPlatformTokenSpaceGuid.PcdDefaultBootDescription|L"Linux (EFI stub) on > virtio31:hd0:part0" > + > gArmPlatformTokenSpaceGuid.PcdDefaultBootDevicePath|L"VenHw(837DCA9E-E874-4D82-B29A-23FE0E23D1E2,003E000A00000000)/HD(1,MBR,0x00000000,0x3F,0x19FC0)/Image" I called this out in my last review, but now I realize I was wrong -- the text rendering above *already* corresponded to the base address contents of the VenHw node. So sorry about that noise. It's fine. > + gArmPlatformTokenSpaceGuid.PcdDefaultBootArgument|"root=/dev/vda2 > console=ttyAMA0,38400n8 earlycon=pl011,0x9000000 uefi_debug" > + gArmPlatformTokenSpaceGuid.PcdDefaultBootType|0 > + > + # Use the serial console (ConIn & ConOut) and the Graphic driver (ConOut) > + > gArmPlatformTokenSpaceGuid.PcdDefaultConOutPaths|L"VenHw(D3987D4B-971A-435F-8CAF-4967EB627241)/Uart(38400,8,N,1)/VenVt100()" > + > gArmPlatformTokenSpaceGuid.PcdDefaultConInPaths|L"VenHw(D3987D4B-971A-435F-8CAF-4967EB627241)/Uart(38400,8,N,1)/VenVt100()" > + gArmPlatformTokenSpaceGuid.PcdPlatformBootTimeOut|3 > + > + # > + # ARM Virtual Architectural Timer > + # > + gArmTokenSpaceGuid.PcdArmArchTimerFreqInHz|100000000 > + > + # > + # NV Storage PCDs. Use base of 0x04000000 for NOR1 > + # > + gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x04000000 > + gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x00040000 > + gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x04040000 > + gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x00040000 > + gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x04080000 > + gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x00040000 > + These were moved over from the NOR flash patch ([PATCH v3 10/10] AArch64-KVM: add support for non-volatile variable store). You've also preserved them as fixed-at-build. Good. > + # System Memory -- 1 MB initially, actual size will be fetched from DT > + gArmTokenSpaceGuid.PcdSystemMemoryBase|0x40000000 > + And now we use the opportunity to keep this one fixed-at-build too. Great! The leading comment could be moved down a little bit (to PcdSystemMemorySize), but it's not disturbing. Move it at will. > +[PcdsDynamicDefault.common] > + gArmTokenSpaceGuid.PcdSystemMemorySize|0x00100000 > + > + # location of the device tree blob passed by QEMU > + gArmTokenSpaceGuid.PcdDeviceTreeBaseAddress|0x40000000 > + > + gArmTokenSpaceGuid.PcdArmArchTimerSecIntrNum|0x0 > + gArmTokenSpaceGuid.PcdArmArchTimerIntrNum|0x0 > + gArmTokenSpaceGuid.PcdArmArchTimerVirtIntrNum|0x0 > + gArmTokenSpaceGuid.PcdArmArchTimerHypIntrNum|0x0 > + > + # > + # ARM General Interrupt Controller > + # > + gArmTokenSpaceGuid.PcdGicDistributorBase|0x0 > + gArmTokenSpaceGuid.PcdGicInterruptInterfaceBase|0x0 > + > + ## PL031 RealTimeClock > + gArmPlatformTokenSpaceGuid.PcdPL031RtcBase|0x0 > + > +################################################################################ > +# > +# Components Section - list of all EDK II Modules needed by this Platform > +# > +################################################################################ > +[Components.common] > + > + # > + # PEI Phase modules > + # > + ArmPlatformPkg/PrePeiCore/PrePeiCoreUniCore.inf { > + <LibraryClasses> > + > ArmPlatformGlobalVariableLib|ArmPlatformPkg/Library/ArmPlatformGlobalVariableLib/Pei/PeiArmPlatformGlobalVariableLib.inf > + } > + MdeModulePkg/Core/Pei/PeiMain.inf > + MdeModulePkg/Universal/PCD/Pei/Pcd.inf > + ArmPlatformPkg/PlatformPei/PlatformPeim.inf > + ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf > + ArmPkg/Drivers/CpuPei/CpuPei.inf > + IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf > + > + MdeModulePkg/Universal/Variable/Pei/VariablePei.inf > + MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf { > + <LibraryClasses> > + > NULL|IntelFrameworkModulePkg/Library/LzmaCustomDecompressLib/LzmaCustomDecompressLib.inf > + } > + > + # > + # DXE > + # > + MdeModulePkg/Core/Dxe/DxeMain.inf { > + <LibraryClasses> > + > NULL|MdeModulePkg/Library/DxeCrc32GuidedSectionExtractLib/DxeCrc32GuidedSectionExtractLib.inf > + } > + MdeModulePkg/Universal/PCD/Dxe/Pcd.inf > + > + # > + # Architectural Protocols > + # > + ArmPkg/Drivers/CpuDxe/CpuDxe.inf > + MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf > + MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf > + MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf > + MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf >From the norflash patch again, good. > + MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf > + > MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf > + EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf > + EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf > + EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf > + > + MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf > + MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf > + MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf > + MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf > + EmbeddedPkg/SimpleTextInOutSerial/SimpleTextInOutSerial.inf > + EmbeddedPkg/SerialDxe/SerialDxe.inf > + > + MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf > + > + ArmPkg/Drivers/ArmGic/ArmGicDxe.inf > + ArmPkg/Drivers/TimerDxe/TimerDxe.inf > + ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf { > + <LibraryClasses> > + > NorFlashPlatformLib|ArmPlatformPkg/ArmVirtualizationPkg/Library/NorFlashQemuLib/NorFlashQemuLib.inf > + } Ditto, using our own lib, with the updated name. Great. > + MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf > + > + # > + # Platform Driver > + # > + ArmPlatformPkg/ArmVirtualizationPkg/VirtFdtDxe/VirtFdtDxe.inf > + OvmfPkg/VirtioBlkDxe/VirtioBlk.inf > + OvmfPkg/VirtioScsiDxe/VirtioScsi.inf > + OvmfPkg/VirtioNetDxe/VirtioNet.inf > + > + > + # > + # FAT filesystem + GPT/MBR partitioning > + # > + MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf > + MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf > + MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf > + > + # > + # Bds > + # > + MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf > + ArmPlatformPkg/Bds/Bds.inf > diff --git a/ArmPlatformPkg/ArmVirtualizationPkg/ArmVirtualizationQemu.fdf > b/ArmPlatformPkg/ArmVirtualizationPkg/ArmVirtualizationQemu.fdf > new file mode 100644 > index 000000000000..b02052ef9e45 > --- /dev/null > +++ b/ArmPlatformPkg/ArmVirtualizationPkg/ArmVirtualizationQemu.fdf > @@ -0,0 +1,313 @@ > +# > +# Copyright (c) 2011, 2013, ARM Limited. All rights reserved. > +# Copyright (c) 2014, Linaro Limited. All rights reserved. > +# > +# This program and the accompanying materials > +# are licensed and made available under the terms and conditions of the BSD > License > +# which accompanies this distribution. The full text of the license may be > found at > +# http://opensource.org/licenses/bsd-license.php > +# > +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, > +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR > IMPLIED. > +# > + > +################################################################################ > +# > +# FD Section > +# The [FD] Section is made up of the definition statements and a > +# description of what goes into the Flash Device Image. Each FD section > +# defines one flash "device" image. A flash device image may be one of > +# the following: Removable media bootable image (like a boot floppy > +# image,) an Option ROM image (that would be "flashed" into an add-in > +# card,) a System "Flash" image (that would be burned into a system's > +# flash) or an Update ("Capsule") image that will be used to update and > +# existing system flash. > +# > +################################################################################ > + > +[FD.QEMU_EFI] > +BaseAddress = 0x00000000|gArmTokenSpaceGuid.PcdFdBaseAddress # QEMU > assigns 0 - 0x8000000 for a BootROM > +Size = 0x00200000|gArmTokenSpaceGuid.PcdFdSize # The size > in bytes of the FLASH Device > +ErasePolarity = 1 > + > +# This one is tricky, it must be: BlockSize * NumBlocks = Size > +BlockSize = 0x00001000 > +NumBlocks = 0x200 > + > +################################################################################ > +# > +# Following are lists of FD Region layout which correspond to the locations > of different > +# images within the flash device. > +# > +# Regions must be defined in ascending order and may not overlap. > +# > +# A Layout Region start with a eight digit hex offset (leading "0x" > required) followed by > +# the pipe "|" character, followed by the size of the region, also in hex > with the leading > +# "0x" characters. Like: > +# Offset|Size > +# PcdOffsetCName|PcdSizeCName > +# RegionType <FV, DATA, or FILE> > +# > +################################################################################ > + > +# > +# UEFI has trouble dealing with FVs that reside at physical address 0x0. > +# So instead, put a hardcoded 'jump to 0x1000' at offset 0x0, and put the > +# real FV at offset 0x1000 > +# > +0x00000000|0x00001000 > +DATA = { > +!if $(ARCH) == AARCH64 > + 0x00, 0x04, 0x00, 0x14 # 'b 0x1000' in AArch64 ASM > +!else > + 0xfe, 0x03, 0x00, 0xea # 'b 0x1000' in AArch32 ASM > +!endif > +} > + > +0x00001000|0x001ff000 > +gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize > +FV = FVMAIN_COMPACT > + > + > +################################################################################ > +# > +# FV Section > +# > +# [FV] section is used to define what components or modules are placed > within a flash > +# device file. This section also defines order the components and modules > are positioned > +# within the image. The [FV] section consists of define statements, set > statements and > +# module statements. > +# > +################################################################################ > + > +[FV.FvMain] > +BlockSize = 0x40 > +NumBlocks = 0 # This FV gets compressed so make it just big > enough > +FvAlignment = 16 # FV alignment and FV attributes setting. > +ERASE_POLARITY = 1 > +MEMORY_MAPPED = TRUE > +STICKY_WRITE = TRUE > +LOCK_CAP = TRUE > +LOCK_STATUS = TRUE > +WRITE_DISABLED_CAP = TRUE > +WRITE_ENABLED_CAP = TRUE > +WRITE_STATUS = TRUE > +WRITE_LOCK_CAP = TRUE > +WRITE_LOCK_STATUS = TRUE > +READ_DISABLED_CAP = TRUE > +READ_ENABLED_CAP = TRUE > +READ_STATUS = TRUE > +READ_LOCK_CAP = TRUE > +READ_LOCK_STATUS = TRUE > + > + APRIORI DXE { > + INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf > + } > + INF MdeModulePkg/Core/Dxe/DxeMain.inf > + INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf > + INF ArmPlatformPkg/ArmVirtualizationPkg/VirtFdtDxe/VirtFdtDxe.inf > + > + # > + # PI DXE Drivers producing Architectural Protocols (EFI Services) > + # > + INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf > + INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf > + INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf > + INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf > + INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf > + INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf from the prev. norflash patch, ok... > + INF > MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf > + INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf > + INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf > + INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf > + INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf > + > + # > + # Multiple Console IO support > + # > + INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf > + INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf > + INF > MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf > + INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf > + INF EmbeddedPkg/SerialDxe/SerialDxe.inf > + > + INF ArmPkg/Drivers/ArmGic/ArmGicDxe.inf > + INF ArmPkg/Drivers/TimerDxe/TimerDxe.inf > + INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf ditto, OK > + INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf > + > + # > + # FAT filesystem + GPT/MBR partitioning > + # > + INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf > + INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf > + INF FatBinPkg/EnhancedFatDxe/Fat.inf > + INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf > + > + # > + # Platform Driver > + # > + INF OvmfPkg/VirtioBlkDxe/VirtioBlk.inf > + INF OvmfPkg/VirtioNetDxe/VirtioNet.inf > + INF OvmfPkg/VirtioScsiDxe/VirtioScsi.inf > + > + # > + # UEFI application (Shell Embedded Boot Loader) > + # > + INF ShellBinPkg/UefiShell/UefiShell.inf > + > + # > + # Bds > + # > + INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf > + INF ArmPlatformPkg/Bds/Bds.inf > + > + > +[FV.FVMAIN_COMPACT] > +FvAlignment = 16 > +ERASE_POLARITY = 1 > +MEMORY_MAPPED = TRUE > +STICKY_WRITE = TRUE > +LOCK_CAP = TRUE > +LOCK_STATUS = TRUE > +WRITE_DISABLED_CAP = TRUE > +WRITE_ENABLED_CAP = TRUE > +WRITE_STATUS = TRUE > +WRITE_LOCK_CAP = TRUE > +WRITE_LOCK_STATUS = TRUE > +READ_DISABLED_CAP = TRUE > +READ_ENABLED_CAP = TRUE > +READ_STATUS = TRUE > +READ_LOCK_CAP = TRUE > +READ_LOCK_STATUS = TRUE > + > + APRIORI PEI { > + INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf > + } > + INF ArmPlatformPkg/PrePeiCore/PrePeiCoreUniCore.inf > + INF MdeModulePkg/Core/Pei/PeiMain.inf > + INF ArmPlatformPkg/PlatformPei/PlatformPeim.inf > + INF ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf > + INF ArmPkg/Drivers/CpuPei/CpuPei.inf > + INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf > + INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf ditto, OK > + INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf > + INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf > + > + FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 { > + SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED > = TRUE { > + SECTION FV_IMAGE = FVMAIN > + } > + } > + > + > +################################################################################ > +# > +# Rules are use with the [FV] section's module INF type to define > +# how an FFS file is created for a given INF file. The following Rule are > the default > +# rules for the different module type. User can add the customized rules to > define the > +# content of the FFS file. > +# > +################################################################################ > + > + > +############################################################################ > +# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section # > +############################################################################ > +# > +#[Rule.Common.DXE_DRIVER] > +# FILE DRIVER = $(NAMED_GUID) { > +# DXE_DEPEX DXE_DEPEX Optional > $(INF_OUTPUT)/$(MODULE_NAME).depex > +# COMPRESS PI_STD { > +# GUIDED { > +# PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi > +# UI STRING="$(MODULE_NAME)" Optional > +# VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER) > +# } > +# } > +# } > +# > +############################################################################ > + > +[Rule.Common.SEC] > + FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED { > + TE TE Align = 128 $(INF_OUTPUT)/$(MODULE_NAME).efi > + } > + > +[Rule.Common.PEI_CORE] > + FILE PEI_CORE = $(NAMED_GUID) { > + TE TE Align = 8 $(INF_OUTPUT)/$(MODULE_NAME).efi > + UI STRING ="$(MODULE_NAME)" Optional > + } > + > +[Rule.Common.PEIM] > + FILE PEIM = $(NAMED_GUID) { > + PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex > + TE TE Align = 8 $(INF_OUTPUT)/$(MODULE_NAME).efi > + UI STRING="$(MODULE_NAME)" Optional > + } > + > +[Rule.Common.PEIM.TIANOCOMPRESSED] > + FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 { > + PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex > + GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE { > + PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi > + UI STRING="$(MODULE_NAME)" Optional > + } > + } > + > +[Rule.Common.DXE_CORE] > + FILE DXE_CORE = $(NAMED_GUID) { > + PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi > + UI STRING="$(MODULE_NAME)" Optional > + } > + > +[Rule.Common.UEFI_DRIVER] > + FILE DRIVER = $(NAMED_GUID) { > + DXE_DEPEX DXE_DEPEX Optional > $(INF_OUTPUT)/$(MODULE_NAME).depex > + PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi > + UI STRING="$(MODULE_NAME)" Optional > + } > + > +[Rule.Common.DXE_DRIVER] > + FILE DRIVER = $(NAMED_GUID) { > + DXE_DEPEX DXE_DEPEX Optional > $(INF_OUTPUT)/$(MODULE_NAME).depex > + PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi > + UI STRING="$(MODULE_NAME)" Optional > + } > + > +[Rule.Common.DXE_RUNTIME_DRIVER] > + FILE DRIVER = $(NAMED_GUID) { > + DXE_DEPEX DXE_DEPEX Optional > $(INF_OUTPUT)/$(MODULE_NAME).depex > + PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi > + UI STRING="$(MODULE_NAME)" Optional > + } > + > +[Rule.Common.UEFI_APPLICATION] > + FILE APPLICATION = $(NAMED_GUID) { > + UI STRING ="$(MODULE_NAME)" Optional > + PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi > + } > + > +[Rule.Common.UEFI_DRIVER.BINARY] > + FILE DRIVER = $(NAMED_GUID) { > + DXE_DEPEX DXE_DEPEX Optional |.depex > + PE32 PE32 |.efi > + UI STRING="$(MODULE_NAME)" Optional > + VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER) > + } > + > +[Rule.Common.UEFI_APPLICATION.BINARY] > + FILE APPLICATION = $(NAMED_GUID) { > + PE32 PE32 |.efi > + UI STRING="$(MODULE_NAME)" Optional > + VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER) > + } > + > +[Rule.Common.USER_DEFINED.ACPITABLE] > + FILE FREEFORM = $(NAMED_GUID) { > + RAW ACPI |.acpi > + RAW ASL |.aml > + UI STRING="$(MODULE_NAME)" Optional > + } > + > -- > 1.8.3.2 > Pure gold. Reviewed-by: Laszlo Ersek <[email protected]> ------------------------------------------------------------------------------ Slashdot TV. Video for Nerds. Stuff that matters. http://tv.slashdot.org/ _______________________________________________ edk2-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/edk2-devel
