> On Jun 22, 2015, at 8:21 AM, Jeyaraman Sundararajan (jeysunda)
> <jeysu...@cisco.com> wrote:
>
> Hi Andrew
>
> My answers inline
>
> From: Andrew Fish [mailto:af...@apple.com <mailto:af...@apple.com>]
> Sent: 22 June 2015 07:35
> To: edk2-devel@lists.sourceforge.net <mailto:edk2-devel@lists.sourceforge.net>
> Cc: Subramanian Karunanithi (sukaruna)
> Subject: Re: [edk2] How to fix (CPU address space) upper address in EDKII
>
>
> On Jun 22, 2015, at 12:09 AM, Jeyaraman Sundararajan (jeysunda)
> <jeysu...@cisco.com <mailto:jeysu...@cisco.com>> wrote:
>
> Hi
> We have a requirement to fix the reset vector code at FFFE_FFFF instead of
> the default FFFF_FFFF. How to set the upper address in build tools so that
> all SEC/PEI modules will be relocated based on the new Top of address.
>
>
> If this is x86, is your reset vector really at 0xFFFEFFF0? Or is you chipset
> inverting an address bit?
> [Jey] We have a non-BIOS code at 0xFFFF_FFFF which will execute first then
> it’ll give control to BIOS reset vector code that we want to place it at
> 0xFFFE_FFFF
>
> 1) The question you asked the reset vector is @ 0xFFFEFFF0
> You just move the FV with the SEC so that it ends @ 0xFFFEFFFF.
> The SEC has a “magic” file name GUID, call volume top, and the tools will
> always pack this file at the very end of the FV.
> [Jey] I know about VTF file but in for our case if move the SEC FV ends @
> 0xFFFEFFF, the build tool is not able to fix the BFV Base address, AP entry
> point & SEC __MoudleEntryPoint where are present at 16 bytes of final image.
> Do you know any configuration has to be added(in *.fdf or in any other file)
> to fake the build tool to assume the top of address is 0xFFFE_FFFF.
>
I have no idea what the code does if you move away from the architectural
addresses, sounds like it breaks. You could debug it and submit a patch. This
would be a new feature for the tool.
It may be simpler to have the BIOS be at the normal address and write a post
processing tool to patch your address into the reset vector. This assume you
save the BIOS reset vector code in your area. I’m not sure off the top of my
head how easy this patching would be given you jumping out of the reset vector
CS:IP FFFFF000h:FFF0h
If your code sets up a stack, it could call the BIOS code using the PEI Core
entry point API, and then you could leave the other magic locations as is (get
patched into your area).
Thanks,
Andrew Fish
> 2) If you chipset is inverting BIT16, but expecting the reset vector to be
> 0xFFFEFFF0
> The edk2 build system does not support this kind of TopSwap.
> What you do is:
> Map the FV with the SEC from 0xFFFF0000 - 0xFFFFFFFF.
> Have a fake region from 0xFFFE0000 - 0xFFEFFFF in the FD flash map.
> Use a post processing tool to patch the value of the last 64K of the FD into
> the previous 64K.
>
> Thanks,
>
> Andrew Fish
>
>
>
> Thanks
> Jeyaram
> ------------------------------------------------------------------------------
> Monitor 25 network devices or servers for free with OpManager!
> OpManager is web-based network management software that monitors
> network devices and physical & virtual servers, alerts via email & sms
> for fault. Monitor 25 devices for free with no restriction. Download now
> http://ad.doubleclick.net/ddm/clk/292181274;119417398;o_______________________________________________
>
> <http://ad.doubleclick.net/ddm/clk/292181274;119417398;o_______________________________________________>
> edk2-devel mailing list
> edk2-devel@lists.sourceforge.net <mailto:edk2-devel@lists.sourceforge.net>
> https://lists.sourceforge.net/lists/listinfo/edk2-devel
> <https://lists.sourceforge.net/lists/listinfo/edk2-devel>
>
> ------------------------------------------------------------------------------
> Monitor 25 network devices or servers for free with OpManager!
> OpManager is web-based network management software that monitors
> network devices and physical & virtual servers, alerts via email & sms
> for fault. Monitor 25 devices for free with no restriction. Download now
> http://ad.doubleclick.net/ddm/clk/292181274;119417398;o_______________________________________________
>
> <http://ad.doubleclick.net/ddm/clk/292181274;119417398;o_______________________________________________>
> edk2-devel mailing list
> edk2-devel@lists.sourceforge.net <mailto:edk2-devel@lists.sourceforge.net>
> https://lists.sourceforge.net/lists/listinfo/edk2-devel
> <https://lists.sourceforge.net/lists/listinfo/edk2-devel>
------------------------------------------------------------------------------
Monitor 25 network devices or servers for free with OpManager!
OpManager is web-based network management software that monitors
network devices and physical & virtual servers, alerts via email & sms
for fault. Monitor 25 devices for free with no restriction. Download now
http://ad.doubleclick.net/ddm/clk/292181274;119417398;o
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/edk2-devel
