Hi,
I followed the build instructions for a 0.79 debug build using the make
scripts in following sections 2 and 3 of this document:
http://firmware.intel.com/sites/default/files/MinnowBoard_MAX-Rel_0.79-ReleaseNotes.txt
It creates a 3MB image in the Vlv2TblDevicePkg\Stitch subdirectory. The
flash utility requires an 8MB image and won't even flash it. I flashed this
bin file to the MinnowMax using a DediProg (erasing first). When powering
the device off and back on, I get no serial debug output from the GPIO pins
or console output. I flash the stock Intel 0.79 image back and it boots up
just fine.
Also tried padding the 3MB image with 0x00 and 0xFF bytes and that doesn't
work either.
My question is --- is there a build script that needs to be modified to
make the image bootable with this minnowmax source tree?
Thanks!
Jim
------------------------------------------------------------------------------
Monitor 25 network devices or servers for free with OpManager!
OpManager is web-based network management software that monitors
network devices and physical & virtual servers, alerts via email & sms
for fault. Monitor 25 devices for free with no restriction. Download now
http://ad.doubleclick.net/ddm/clk/292181274;119417398;o
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/edk2-devel
