Please check if there is any error message printed during the build. If build
success, there should be a 8MB image created under
"C:\MyWorkspace\Vlv2TbltDevicePkg\Stitch\".
Thanks,
David | SSG BIOS
From: Ulysses Mckibbens [mailto:zergrusher2...@gmail.com]
Sent: Friday, June 26, 2015 8:17 AM
To: edk2-devel@lists.sourceforge.net
Subject: [edk2] Minnowboard Max compiled firmware boot issue
Hi,
I followed the build instructions for a 0.79 debug build using the make scripts
in following sections 2 and 3 of this document:
http://firmware.intel.com/sites/default/files/MinnowBoard_MAX-Rel_0.79-ReleaseNotes.txt
It creates a 3MB image in the Vlv2TblDevicePkg\Stitch subdirectory. The flash
utility requires an 8MB image and won't even flash it. I flashed this bin file
to the MinnowMax using a DediProg (erasing first). When powering the device off
and back on, I get no serial debug output from the GPIO pins or console output.
I flash the stock Intel 0.79 image back and it boots up just fine.
Also tried padding the 3MB image with 0x00 and 0xFF bytes and that doesn't
work either.
My question is --- is there a build script that needs to be modified to make
the image bootable with this minnowmax source tree?
Thanks!
Jim
------------------------------------------------------------------------------
Monitor 25 network devices or servers for free with OpManager!
OpManager is web-based network management software that monitors
network devices and physical & virtual servers, alerts via email & sms
for fault. Monitor 25 devices for free with no restriction. Download now
http://ad.doubleclick.net/ddm/clk/292181274;119417398;o
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/edk2-devel
