I am also seeing this in my sipproxy logs on the endian firewall proxy.c:739 ERROR:proxy_response: list_get via failed
rbull wrote: > > The IRC help feature in the freepbx gui also stopped working for me after > I installed the endian firewall, Seems like the endian firewall is > blocking access to it since i keep getting connection refused. > > > rbull wrote: >> >> The trixbox has always been set up on an internal IP. Before it was >> behind a d-link router that I removed and replaced with the endian >> firewall. The trixbox's IP address has not changed. Behind the d-link >> router I could make outbound calls using my telasip trunk with no issues, >> as soon as I replaced the D-link router with the endian firewall the >> telasip trunk was broken. The ports that I am forwarding are: >> >> IAX 4569 TCP/UDP >> RTP 10001-10300 TCP/UDP >> SIP 5004-5082 TCP/UDP >> >> The phones work correctly when I use the internal IP of the trixbox >> 192.168.0.9 but dont work when i use the domain name. They work >> externally using the domain name wich is expected. I can call extension >> to extension but I can not use my telasip trunk, I keep getting a message >> that all circuts are busy please try again later on the inside when I try >> to use it, and when I try to use it externally it just rings and rings in >> my headset but never rings the destiantion phone. >> >> >> Jake Vickers-2 wrote: >>> >>> rbull wrote: >>>> I have a trixbox ([EMAIL PROTECTED]) server set up on the green interface. >>>> Before I set up my endian firewall the trixbox would work perfectly. >>>> The >>>> phones registered and I was able to use my SIP trunk to make outbound >>>> calls. >>>> After I installed the endian firewall and forwarded the proper ports >>>> however, I can't use the outbound trunk for calls anymore. I keep >>>> getting a >>>> message that all circuts are busy. I can still call extension to >>>> extension. >>>> Also before I installed the firewall I was able to hit the asterisk box >>>> from >>>> the outside and the inside by using our domain name, now I can only hit >>>> it >>>> by domain name on the outside, and have to use the internal IP address >>>> on >>>> the inside. I would like to get this back to only having to use the >>>> domain >>>> name to hit the box from both inside and outside. Any help would be >>>> appreciated. >>>> >>> I run a Trix behind Endian myself. If you had the Trix on a public IP >>> and moved it to a private IP, then you'll probably have to set up an >>> internal DNS server. You'll need to program the phones for the Trix's >>> real IP, not the domain name. Otherwise it's trying to go out, then back >>> in. >>> And you must have some ports set wrong. Do you have NAT turned on in >>> your SIP box? >>> >>> ------------------------------------------------------------------------- >>> Using Tomcat but need to do more? Need to support web services, >>> security? >>> Get stuff done quickly with pre-integrated technology to make your job >>> easier >>> Download IBM WebSphere Application Server v.1.0.1 based on Apache >>> Geronimo >>> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 >>> _______________________________________________ >>> Efw-user mailing list >>> [email protected] >>> https://lists.sourceforge.net/lists/listinfo/efw-user >>> >>> >> >> > > -- View this message in context: http://www.nabble.com/Trixbox-and-endian-tf2177079.html#a6020473 Sent from the efw-user forum at Nabble.com. ------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 _______________________________________________ Efw-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/efw-user
