I don't believe that subnet mask is correct for that address. 

And I'm not sure I understand this:

" the d-link gets it's info through dhcp and THAT is not even working from efw"

The d-link is the dsl router? And it gets its address from your ISP using DHCP?
And the efw cant ping it, or whats not working?

Kinda sounds like you have the red and green nics connected the wrong way.
That's why you should enable the DCHP service of the efw, and make sure your
workstation is getting an auto-assigned ip from it. It's a way of testing it.

Or maybe sounds like your dsl modem is not a bridge, and you should not be
assigning 24.72.112.29 to your red card.



-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of turbo
Sent: Wednesday, October 03, 2007 7:12 PM
To: [email protected]
Subject: Re: [Efw-user] I am lost with new install, help please


These are my settings from my d-link page

ip 24.72.112.29
subnet: 255.255.255.0
gateway: 24.72.112.1
 the d-link gets it's info through dhcp and THAT is not even working from
efw. If I try to get the proper settings, I don't see a result until I log
in to the webgui. There it shows for the connection a yellow bar. After
punshing in the correct # in the network setup with ethernet static, I get e
green bar and it says "connected" and with ifconfig it shows the connections
as it shows it in the gui, even the gateway is shown. When looking at those
information, it SHOULD work, but it is somewhere inside ?  of efw broken.
Why, where ...???????

Ah, I can't even ping the ISP's gateway. Why , I don't know anymore.
Below is the networkstatus.
----------------------
br0       Link encap:Ethernet  HWaddr 00:50:FC:EE:BF:E8  
          inet addr:192.168.100.1  Bcast:192.168.100.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1663 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2741 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:118958 (116.1 KiB)  TX bytes:624183 (609.5 KiB)

eth0      Link encap:Ethernet  HWaddr 00:06:5B:82:FC:F7  
          inet addr:24.72.112.29  Bcast:24.72.112.255  Mask:255.255.255.0
          UP BROADCAST RUNNING PROMISC MULTICAST  MTU:1500  Metric:1
          RX packets:15164 errors:0 dropped:0 overruns:0 frame:0
          TX packets:474 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:960202 (937.6 KiB)  TX bytes:190692 (186.2 KiB)
          Interrupt:11 Base address:0xe880 

eth1      Link encap:Ethernet  HWaddr 00:50:FC:EE:BF:E8  
          UP BROADCAST RUNNING PROMISC MULTICAST  MTU:1500  Metric:1
          RX packets:5932 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2738 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:409687 (400.0 KiB)  TX bytes:625185 (610.5 KiB)
          Interrupt:9 Base address:0xec00 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:460 errors:0 dropped:0 overruns:0 frame:0
          TX packets:460 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:31192 (30.4 KiB)  TX bytes:31192 (30.4 KiB)
------------------

and now I am ???????????????????

Johannes




compdoc wrote:
> 
> Are you sure that your DSL modem is set to bridging mode, so that you can
> actually assign 24.72.112.19 to your red interface? Often, the external IP
> is
> assigned to the modem, and not a PC behind it.
> 
> Also, just as important as the IP address is the subnet masks, especially
> on the
> red. You haven't told us what that is yet...
> 
> And one more thing, turn on the DHCP service, and set your workstation to
> use
> auto. This makes sure things are where they should be...
> 
> 
> 
> 
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of turbo
> Sent: Wednesday, October 03, 2007 6:43 PM
> To: [email protected]
> Subject: Re: [Efw-user] I am lost with new install, help please
> 
> 
> the machine from the LAN can ping the efw. and is not using dhcp, all
> fixed
> IP on the LAN.
> 
> efw green: 192.168.100.1   Lan: 192.168.100.9    red:24.72.112.19 
> ISP gateway 24.72.112.1
> 
> 
> Johannes
> 
> 
> 
> compdoc wrote:
>> 
>> Guess I should ask a basic question, since I didn't see it listed  - you
>> have a
>> workstation in the green zone? Is it using DHCP to obtain its IP addy?
>> What is
>> that address? It can ping the firewall? 
>> 
>> What is the IP address and subnet mask of the red card?
>> 
>> 
>> -------------------------------------------------------------------------
>> This SF.net email is sponsored by: Splunk Inc.
>> Still grepping through log files to find problems?  Stop.
>> Now Search log events and configuration files using AJAX and a browser.
>> Download your FREE copy of Splunk now >> http://get.splunk.com/
>> _______________________________________________
>> Efw-user mailing list
>> [email protected]
>> https://lists.sourceforge.net/lists/listinfo/efw-user
>> 
>> 
> 
> -- 
> View this message in context:
>
http://www.nabble.com/I-am-lost-with-new-install%2C-help-please-tf4564215.html#a
> 13030741
> Sent from the efw-user mailing list archive at Nabble.com.
> 
> 
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Splunk Inc.
> Still grepping through log files to find problems?  Stop.
> Now Search log events and configuration files using AJAX and a browser.
> Download your FREE copy of Splunk now >> http://get.splunk.com/
> _______________________________________________
> Efw-user mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/efw-user
> 
> 
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Splunk Inc.
> Still grepping through log files to find problems?  Stop.
> Now Search log events and configuration files using AJAX and a browser.
> Download your FREE copy of Splunk now >> http://get.splunk.com/
> _______________________________________________
> Efw-user mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/efw-user
> 
> 

-- 
View this message in context:
http://www.nabble.com/I-am-lost-with-new-install%2C-help-please-tf4564215.html#a
13030978
Sent from the efw-user mailing list archive at Nabble.com.


-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems?  Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
_______________________________________________
Efw-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/efw-user


-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems?  Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
_______________________________________________
Efw-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/efw-user

Reply via email to