Hi Wolfgang, I appreciate the reply. I did go through the FAQs and saw that one. I believe it's exclusive to issues with e500 architectures, am I correct? My target is not an e500 based system it's the 440 architecture and GDB appears to be locked into an e500 arch configuration.
Thanks, Nate -----Original Message----- From: Wolfgang Denk [mailto:[email protected]] Sent: Tuesday, November 02, 2010 16:01 PM To: Nate Jozwiak Cc: [email protected] Subject: Re: [ELDK] GDB Issue Dear "Nate Jozwiak", In message <024501cb7abd$a49f1dd0$eddd59...@biz> you wrote: > > I am having an issue getting U-Boot going on a PPC-440GX board. I am using > the GDB that was built with U-Boot for ppc-4xx and a BDI3000 to connect to > the target. Whenever I attempt to connect to the BDI3000, I get the > following error: > > (gdb) target remote 192.168.4.252:2001 > Remote debugging using 192.168.4.252:2001 > Remote 'g' packet reply is too long:deadbeaf.... You hit a FAQ. Please see here: http://www.denx.de/wiki/view/DULG/ELDKGDBProblemsOnE500 Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [email protected] Computers make excellent and efficient servants, but I have no wish to serve under them. Captain, a starship also runs on loyalty to one man. And nothing can replace it or him. -- Spock, "The Ultimate Computer", stardate 4729.4 _______________________________________________ eldk mailing list [email protected] http://lists.denx.de/mailman/listinfo/eldk
