Hello Wolfgang,
Am 23.03.2012 14:07, schrieb Wolfgang Denk:
Dear Axel,
In message<[email protected]> you
wrote:
i build the ELDK 5.1.2 from the sources and try to boot the core
basic image over nfs with the build 3.1.4 Kernel on an powerpc
architecture (TB5200L). Another, self configured Kernel (v3.1.5) with
NFS support build in has the same behaviour.
Have you tried these kernel images with another root file system?
Yes, i have checked it with different rootfs'. But they all from the
eldk-5.1.2 build. I will have a check with a complete different (working
old) one later.
This would be helpful to figure out if your kernel configuration and
your device tree blob are OK.
The device tree blob is that one wich was build with 'make tqm5200.dtb'
Getting the Kernel uImage via TFTP works and booting stops not with a
panic or an reboot. My Problem is that after booting the kernel the
system stops booting after linking the ethernet PHY [ 134.418108]
PHY: f0003000:00 - Link is Up - 100/Fullwhere it try to mount the
rootfs.
This looks more like a kernel problem than a root file system issue to
me.
Run a network sniffer (wireshark) and analyze the logs wher eit really
stops working.
Ok.
Best regards,
Wolfgang Denk
Thanks for your help.
Best regards
Axel Beierlein
_______________________________________________
eldk mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/eldk
