Hello Wolfgang,
Am 23.03.2012 14:44, schrieb Wolfgang Denk:
Dear Axel,
In message<[email protected]> you wrote:
i build the ELDK 5.1.2 from the sources and try to boot the core
basic image over nfs with the build 3.1.4 Kernel on an powerpc
architecture (TB5200L). Another, self configured Kernel (v3.1.5) with
NFS support build in has the same behaviour.
...
The device tree blob is that one wich was build with 'make tqm5200.dtb'
TQM5200 != TB5200L
Ok. Booting a TB5200 with an 2.6.x Kernel and this Blob was no problem.
Also the rootfs mount via NFS. (I try this a few Month ago - not with
this actual setup -)
But i will have a look.
Do you have a working one by any chance ;-) ?
Let me guess. This was the reason why the SM501 on the Board gets not a
correct init, too.
This is most likely the cause of your problems.
Best regards,
Wolfgang Denk
Best regards
Axel Beierlein
_______________________________________________
eldk mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/eldk
