Dear Axel, please do not top post / full quote (see http://www.netmeister.org/news/learn2quote.html).
In message <[email protected]> you wrote: > > I try an old working SELF from the eldk311 to test if the nfs > connection was the prob. But this FS was mounted. With this new 3.1.5 > Kernel and the not 100% fitting tq5200.dtb. OK, so it appears the kernel is working. Now focus is on the root file system and the NFS server setup. > Could it be that the Yocto FS are not bootable over nfs? Do i have a > look for special things like permissions and other things? We use these images over NFS all the time - and for the kernel it does not make much of a difference what the underlying file system type is; NFS or ext* or xfs or whatever (assuming some minimal requirements are met). I don't know much about your setup, so I can only speculate... Either something went wrong when installing the root file system, or there are problems with your nFS server configuration. - Did you try a fresh installation of the root file system? - Try running a network sniffer when booting, and check which NFS accesses are done, and where the booting stops. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [email protected] Quote from the Boss... "I didn't say it was your fault. I said I was going to blame it on you." _______________________________________________ eldk mailing list [email protected] http://lists.denx.de/mailman/listinfo/eldk
