Hi Paul,
We also offer the K60XV internal transverter interface option for the K2. It
has a separate low level output for the driving transverters and automatically
switches to that output from the K2's HF output when you select a transverter
band.
To correct for the 100 Hz offset go into the K2's transverter menu area. There
is a +/- offset setting that will compensate for this.
73, Eric WA6HHQ
-----
Paul wrote:
Reflector Members,
Those of you using Elecraft Transverters........Are all of you using an A/B type switch to go from HF to VHF on the K2' transverter hookup?
I was a little surprised to see that to get the Drive RF to the transverters
required the use of an external or separate switch that would require the
individual to switch from the HF antenna to the transverters with an external
switch.
Is there any way to use those lower drive RCA connectors to eliminate the
switch?
Second question - my 144 transverter is about 100 cycles high. Is there a way to correct this?
Paul
K8QT
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft Help:
http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com