G'day, > No, not twisting. Interleaving is simple. Pass one wire through each > hole, then pass the other wire through each hole. Keep alternating > until all the windings are done. As I remember, one winding has more > turns, so start with that wire first. > > This is different from the original manual, which suggests you wind one > layer, then the other.
Well this seems overly complicated. What has changed? #1400 has been throbbing at full power 10W+ on 10 metres since day one. Another suggestion I have made is not to try and align the BPF's with the built in power metering. Much easier to get it on the nose with an external analogy meter like the WM-2 or similar. The meter swing is so much easier to interpret than dancing digits. Regards, Mike VP8NO #1400 _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
