Dear Stephen, My XG2 at 50 microvolts output nominal also shows near enough -78dbm on the P3. At 1 microvolt output it's about -112 dbm. The battery isn't new but doesn't get a lot of use. All after due recalibration procedures.
73 to all Geoff G3UCK ----- Original Message ----- From: "Stephen Prior" <[email protected]> To: "elecraft" <[email protected]> Sent: Saturday, September 25, 2010 4:50 PM Subject: [Elecraft] P3 level accuracy >I have just run the RF gain calibration on the K3 via the utility (and > calibrated the S meter too) using my XG-2 on 40m. Default values of the S > meter give S9 as it should with 50uV from the XG-2. However, the P3 shows > a > level of -78dBm which seems to be outside the P3's published spec of +/- > 3dB. A calibration routine for the P3 utility has been mooted for the > future, but I am wondering whether it's normal for the level to be so far > out. > > I'd be interested in what other XG-2 and P3 owners find. The XG-2 is > running on a new lithium button cell. > > 73 Stephen G4SJP ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
