Don't panic! check you've installed the latest F/W and you have installed all files (all checkboxes in K3 Util for files checked).
If it's not installing correctly, double check the baud speed on both K3 and Util. 73 de M0XDF, K3 #174, P3 #108 -- Hofstadter's Law: The time and effort required to complete a project are always more than you expect, even when you take into account Hofstadter's Law. On 21 Oct 2010, at 12:08, Malcolm Rothwell wrote: > > After seeing various posts on this subject, thought I'd give it a try. > Unfortunately when I opt for factory defaults and click on "Calibrate" I get > the following error message : E0400E3 ERR DSE on the K3 display and on the > K3 utility I see "DSP command response did not arrive". The radio is > performing normally, should I panic?? > > 73 Mal G4KFT > > -- > View this message in context: > http://elecraft.365791.n2.nabble.com/RF-Gain-Factory-Defaults-tp5658229p5658229.html > Sent from the Elecraft mailing list archive at Nabble.com. > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
