I am unable to duplicate your conditions, I am only able to get APF on in CW mode. Wonder if this would be something where a previously uncontrolled memory bit is in an undetermined state, leaving a strange "remembered" condition when those bits are used for the first time?
73, Guy. On Thu, Nov 4, 2010 at 2:50 PM, JAMES ROGERS <[email protected]> wrote: > I went through the CONFIG menus to see what might have changed while > in SSB. I found DUAL PB had APF on. I was unable to turn it off while > in SSB, so went back to CW mode turned the APF off (nor) and returned > to SSB and all was normal. Full output. > > I have confirmed you can only turn APF on/off while in CW mode. > It would then seem that APF should be turned off automatically when in > any mode other than CW. > > JIM ROGERS > [email protected] > http://web.me.com/jimrogers_w4atk > > > > JIM ROGERS > [email protected] > http://web.me.com/jimrogers_w4atk > > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
