John:
There are several(!) versions of Spectrogram available.
IF you are planning on using Spectrogram to align your K2 or K1, then
I'd suggest getting Spectrogram v5.1.7 from my web site... it's
located immediately adjacent to the printed documentation for
aligning your radio (K2 or K1), depending upon which rig-specific
page you've gone to.
You CAN use newer versions of Spectrogram with my alignment docs, but
there's absolutely NO benefit in doing so and newer versions offer
features you will not need nor wish to use.
Visit:
For the K2 - http://www.n0ss.net/index_k2.html
Spectrogram and docs are located about 3/4 of the way down the page
For the K1 - http://www.n0ss.net/index_k1.html
Spectrogram and docs are located about 2/3 of the way down the page
The ONLY additional device you'll need is an audio jumper cable from
the radio;s
speaker output to the input of the sound card on your PC. Suggest
using stereo
connectors, but with TIP and SLEEVE (no RING) connected.
DO NOT OVERDRIVE THE AUDIO INPUT TO THE SOUND CARD.. this will cause audio
artifacts in the display which are not helpful during the alignment process.
If you have ANY PROBLEMS OR QUESTIONS, drop me an e-mail.
73,
Tom Hammond N0SS
At 09:47 12/29/2010, you wrote:
>where can i find this software? tried googling it but apparently
>the company that made it went out of buiseness.
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:[email protected]
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
