Hi Doug, When I built my XV144 about a year ago I had exactly the same problem! I replaced the crystal with a 116MHz one I stole from another transverter I have and it worked OK. Elecraft sent me a replacement crystal very promptly but I never got around to trying it.
Roger - G4BVY -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of GM0ELP Sent: 29 December 2010 21:27 To: [email protected] Subject: Re: [Elecraft] [K3] XV144 fault (offset problem?) Hi Eric/Matt, I am using the XV144 not the internal K144XV. For reference source I am using a beacon and several other local sources (not mine) so definately not my finger problems. Other than the 12.5KHz offset problem all seems well (as far as I can tell) : alignment, comms with K3, ptt, sensitivity, tx audio, power output etc, etc. I have spent the afternoon re-checking component values but haven't found any mistakes yet. I must have made a mistake somewhere if this has never been seen before. Doug GM0ELP -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-XV144-fault-offset-problem-tp5874870 p5875592.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
