David, This is for the external XV144 transverters, no serial numbers involved.
73, Don W3FPR On 2/7/2011 9:08 PM, David Ferrington, M0XDF wrote: > Can you say from which serial number this affects, Eric? > 73 de M0XDF, K3 #174, P3 #108 > > The best time to plant a tree was 20 years ago. The second best > time is today. ~Chinese proverb~ > > > On 8 Feb 2011, at 00:17, Eric Swartz - WA6HHQ, Elecraft wrote: > >> Yes, this mod adds an adjustable coil to move the newer XV144 crystals >> within the +/- 9.9 kHz calibration range of the K3. In most cases it >> will pull the crystal far enough to use an offset of zero, but that is >> not guaranteed in all cases. There is a place already on the XV144 PCB >> for this part. >> >> We offer the XV144MDKT at no cost and the user only pays shipping. It >> should be up on the parts and mod kits order web page in the later this >> week. >> >> 73, Eric WA6HHQ >> ---- >> >> >> On 2/7/2011 11:16 AM, hb9wi wrote: >>> Hi Eric >>> I noticed that Elecraft has published two errata sheets on the transverters. >>> They mention an additional coil L19 in series to the crystal. >>> May I order the coil at Elecraft? > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
