Scott, If Ralph's guess is correct, there is a configuration option to do this offsetting automatically: look at the CONFIG:CW WGHT option in the manual and try setting the automatic VFO offset (tap 5). Note also that on 30m and above you will want to use MD7 and MD2 instead of MD3 and MD1 in your macro command string.
73, Rich VE3KI VE7XF wrote: >>Most of it works except it stays in transmit and the CW "beeps" at the >>operating station but only sounds like a series of clicks over the air... > > Here's my guess, Scott: > Perhaps it's working, ie. sending CW over the air, but it is zero beat with > the SSB frequency, and therefore nobody hears anything. You need a 700hz > (or thereabouts) offset, in a direction compatible with whatever sideband > you're using. > > Remember, it's just a guess - I know nothing about macros. > > Ralph, VE7XF ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
