Scott,
Have you tried turning on "CW in SSB" (CW WGHT -> toggle "1" until
you see "SSB +CW")?
I have not checked but that might eliminate the need for the TX;
and RX; commands entirely (CW input forces Semi Break-In in SSB +CW).
73,
... Joe, W4TV
On 2/15/2011 11:01 AM, N1IRB wrote:
>
> More fiddling and I came up with:
>
> PC020;MD3;TX;KYWN1IRB;RX;MD1;PC100;RX;RX;
>
> This seems to work. With out the three "RX" I was finding it to be
> intermittent as to whether or not it came out of TX as noted by the red TX
> LED remaining eliminated. With less RX commands I also noticed that when
> stuck in TX if I pressed the M1 button to re-execute the macro it would
> simply come out of TX and then run the macro if I pressed the button again.
> Seems weird and glitchy to me.
>
> I wish it would come out of TX at the first RX command instead of having to
> catch it on the 3rd.
>
> I have the CONFIG:CW WGHT option automatic VFO offset (tap 5) set and it
> auto switches 600Hz up or down depending one whether I am in USB or LSB. I
> also removed the KS017 as the first time I run the macro it is set. It
> seemed redundant and cleaner with out it.
>
> Thanks all for the help.
>
> Scott - N1IRB
>
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
