> The cable is not yet available. But thanks for the very valuable
> input. As the internal KRC2 person, I have similar concerns over
> access to the Auxbus for the KRC2.
There are a lot of concerns over access to the signals on the ACC
connector ... including FSK and PTT for digital interfaces, pin 11
for the PR6, "Inhibit" for external sequencers and the Aux bus for
transverters/KRC2. Some sort of "pass through" connection is almost
a "must" ...
73,
... Joe, W4TV
On 4/3/2011 10:08 PM, Jack Brindle wrote:
> Elliott;
>
> The cable is not yet available. But thanks for the very valuable input.
> As the internal KRC2 person, I have similar concerns over access to the
> Auxbus for the KRC2.
> There are also KPA500 AUX signals that are very useful aside form the K3.
> I am certain we will find a good solution that allows access to the K3 ACC
> and the KPA500 AUX signals as needed.
>
> Jack Brindle, W6FB
>
> On Apr 3, 2011, at 6:57 PM, Elliott Lawrence wrote:
>
>> Can any of the field testers using the ACC Connector interface verify if the
>> K3 end of the cable has a through mounted female connector (back to back
>> male/female conncectors) that the mating connector for the PR-6 pre-amp can
>> use for access to pin 11 without having to make any wiring changes? This
>> would also enable access to the other K3 functions and the KPA500
>> simultaneously. If not, sounds like a good option to me!!
>>
>> 73
>> Elliott WA6TLA
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
