I don't know a thing about TRX Manager, but when operating locally, for voice modes I default to Lo-Hi cut on the bandwidth settings and Shift-Width for CW and Data modes.
--- On Thu, 4/14/11, kcflyers <[email protected]> wrote: > I am running K3 remotely using TRX > Manager. When in the 2.8 filter the shift > display is centered on the TRX display, and display below > shows 2800. When > switching to 2.1, the shift display is still > centered. I did notice that > the width control slider moves up (by itself), and width > display at bottom > goes from 2800 to 2100. I did not manually > change the width control. So > in this situation, I have to move the shift slider to > offset from being > centered. This is an inconvenience when switching > back and forth between > filters. > > I am not at my K3, so can't check what happens when I just > change filters, > whether same as above (requiring shift), or not. > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
