Iain, That is why it is easier to use the HI - cut knob to change filters in SSB mode rather than the XFIL button. The center frequency is automatically shifted along with the reduction in the high end.
I have heard this "problem" many times, and there seems to be a lot of resistance to using the "fix" that was built into the K3 from the very start. 73, Don W3FPR On 4/14/2011 8:32 PM, iain macdonnell - N6ML wrote: > You'll have the same problem if you NORMalise in SSB mode, then use > the XFIL button to select a narrower filter - it'll still be centered > on 1.50. It'd be nice if the NORMalise function for SSB mode could be > configurable, and if selecting other filters could, perhaps, adjust > the shift so that, effectively, the LO-cut stays the same. Personally, > I have a 1.8kHz filter, and use 1.8kHz all the time for SSB - I see no > need to let any more than that though to my ears... but I'm not an SSB > rag-chewer...... > > ~iain / N6ML > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
