Jack, It is only a quick guess, but I would think you might want to check the setting for the AF Limiter - that is active when AGC is off, by default.
73, Don W3FPR On 7/9/2011 6:44 PM, wa9fvp wrote: > While operating RTTY, in order to prevent amplitude variations caused by > static crashes, I like to turn off the AGC. It always worked with my Icom > 746 and I didn't care if the audio was distorted. It provided an amplitude > limited FM signal to my Hal DXP-38. > > When I turn off the AGC on the K3, with the RF gain set to max position. > The signal disappears on the line out port. Using an X/Y oscilloscope, > there appears to be noise but no signal. I can hear the very loud RTTY > signal on speaker audio and it never cuts out. When I reduce the RF > gain, the signal appears or sometimes during fading, the RTTY signal > reappears on the X/Y scope. > > > > I’m using Firmware Rev. 4.36, and DSP 2.73 > > te.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
