Hello Alan, If you are mostly CW, 15 watt output from K2 would be adequate for most of the cases. I find the K2+KAT2 combination is very good for field day because of the low standby current. However, KX3 will be on the pipe line and offers similar or better performance. It will depend on whether you really like a through hole soldering kit. If yes, go for K2.
TNX & 73, Johnny VR2XMC 從︰ "[email protected]" <[email protected]> 收件人︰ [email protected] 傳送日期︰ 2011年07月20日 (週三) 12:10 PM 主題︰ [Elecraft] K2 Question QUESTION: For those who have only one radio to use for base station and occasional field operations have you found the K2 to be more than adequate or do you recommend the K2/100 with external ATU? I am a casual operator; both CW (90%) and SSB (10%). Do those of you who have or had the K2/20 have regrets not getting the K2/100? Thank you in advance for your feedback Alan KB7MBI ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
