Hi Alan, I also operate mostly CW with just a little SSB. I have the KPA100 but, I find that most of my operating is done at 10 watts or less. For me, operating SSB at ten watts is a blast. In fact, I had a SSB contact with Aruba the other night with just ten watts.
Ten watts is quite adequate for CW, in my opinion. About half of my contacts are QRP. I should also say that I don't have any beam antennas. I use only a vertical and magnetic loops. It all depends on what you want and why you want it. Have fun deciding! Gary, N7HTS On Wed, 20 Jul 2011 00:10:15 EDT [email protected] wrote: > QUESTION: For those who have only one radio to use for base station and > occasional field operations have you found the K2 to be more than adequate >or > do you recommend the K2/100 with external ATU? I am a casual operator; both > CW (90%) and SSB (10%). > > Do those of you who have or had the K2/20 have regrets not getting the > K2/100? > > Thank you in advance for your feedback > > Alan KB7MBI > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
