thanks Stan, I tried that but will go back and try it again. Was planning to hook a spectrum analyzer to the IF out to see what the actual output level is when I switch to 2m.
73, tom n4zpt On 8/6/2011 11:13 AM, Stan Gibbs wrote: > Tom, > > Sounds like your "Ref Lvl" is set too high. The color of the waterfall > reflects the vertical position of the trace in the frequency display. If > you reduce the reference level, the frequency display will return to a > viewable position, and the orange waterfall will revert to blue. > > The reference level is per-band so you have to adjust it for each band you > operate on. For my 2m setup the ref level is set at -145 dBm, which allows > me to see the frequency trace when the pre-amp is on or off. > > > > ----- > 73, Stan - KR7C ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
