Jason, Do you have the computer port set correctly? 4800 baud, 8 data bits, no parity, 1 or 2 stop bits, handshaking set off (none).
Some USB to serial port adapters have caused problems with some pieces of control software. Can you use a different computer with a real serial port (or a different adapter) for a test? 73, Don W3FPR > -----Original Message----- > > Thanks for the time looking at this everyone. I was just worried > about P4-7 > because the manual says there should be 4.5 V there. I do not have KSB2, > tho. > > Yes, the port menu item is on. > > I'll look at the KIO2 and AUX boards a little more closely. My computer > hasn't got any serial ports, so I'm using a USB to Serial > converter (set to > the specs listed in the manual). It's worked on other hardware, like my > GPS. It has some LEDs on it showing traffic back and forth. My > computer is > trying to send commands to the KIO2, but nothing is coming back > based on the > LED status. I did try the Port menu test option, and the K2 > shows "test" on > its display, but nothing lights up on the USB/Serial converter. > > -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.323 / Virus Database: 267.8.1/28 - Release Date: 6/24/2005 _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
