Hi Don,
that´s right. I received an answer from John K3CT that was working with K3 and N1MM Jorge, See section 3 of the manual: http://n1mm.hamdocs.com/tiki-index.php?page=Supported+Radios&structure=N1MM+ Logger+Documentation The RTTY selection is mapped to the K3 radio mode of FSK D. Just if it´s of help for someone else 73, Jorge CX6VM -----Mensaje original----- De: Don Wilhelm [mailto:[email protected]] Enviado el: Domingo, 25 de Septiembre de 2011 11:02 a.m. Para: Jorge Diez - CX6VM CC: [email protected] Asunto: Re: [Elecraft] change DATA mode alone Jorge, That does sound like N1MM is changing the data submode for you. >From the K3 Programmer's Reference, the DT command will set the DATA sub-mode (if the K3 is already in DATA mode). The MD command will set the K3 mode. MD6; would set DATA mode, and then DT2; would set FSK D. There may be menu settings in N1MM to control the behavior, so asking on the N1MM list is a prudent thing to do. 73, Don W3FPR On 9/25/2011 9:28 AM, Jorge Diez - CX6VM wrote: > Hi Don, > > playing a Little more, I noticed that when I click in a callsign in the N1MM > bandmap, the K3 change to FSK D > > Will ask in N1MM list > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
