Jorge, In N1MM, click on Config, then click on top selection Configure Ports, Mode Control, etc., click on the Mode Control tab and then look for selection under Mode Sent to Radio. For RTTY to -- select AFSK.
Dave, N4QS ----- Original Message ----- From: "Jorge Diez - CX6VM" <[email protected]> Cc: <[email protected]> Sent: Sunday, September 25, 2011 8:28 AM Subject: Re: [Elecraft] change DATA mode alone Hi Don, playing a Little more, I noticed that when I click in a callsign in the N1MM bandmap, the K3 change to FSK D Will ask in N1MM list 73, Jorge CX6VM -----Mensaje original----- De: Don Wilhelm [mailto:[email protected]] Enviado el: Domingo, 25 de Septiembre de 2011 03:25 a.m. Para: Jorge Diez - CX6VM CC: [email protected] Asunto: Re: [Elecraft] change DATA mode alone Jorge, The data sub-modes are remembered per band. For example, if you set the K3 to FSK D for 20 meters, and then set to AFSK A for 40 meters, both of those settings will be remembered. 73, Don W3FPR On 9/24/2011 11:31 PM, Jorge Diez - CX6VM wrote: > Hello, > > > > I am new in RTTY and settled up my K3 in DATA mode = AFSK A to do few QSO´s > during CQWW RTTY contest. > > I noticed that sometimes the K3 change alone to FSK D > > Do you know why happens this? > > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
